Planning Drawings in Penge SE20
Fixed-fee, MCIAT-chartered planning drawings for Penge (SE20) homeowners — London Borough of Bromley validation and local constraints handled from the start.
Penge (SE20) in Bromley is a compact Victorian neighbourhood between its High Street and Crystal Palace Park, with a conservation area centred on the High Street and its notable listed almshouses. Rear and loft projects on the Victorian terraces are the mainstay, worked around those local controls.
The Penge High Street conservation area protects the historic centre, including the listed almshouses, and the tight Victorian terrace plots on many streets shape how far a rear extension can practically go. We check a Penge address against the conservation area and the terrace context before drawing to Bromley's residential guidance.
Planning in Penge (SE20): what to know before you apply
SE20 has no householder Article 4 direction, so many Penge terraces retain permitted development rights for rear and loft projects — but the Penge High Street conservation area, with its listed almshouses, closely controls the historic centre, and the tight Victorian terrace plots limit extension depth on several streets. The nearby Crystal Palace Park setting adds tree and townscape considerations.
Typical Penge housing stock
Victorian terraces and villas on the streets between Penge High Street and Crystal Palace Park, including the listed almshouses on the High Street, with later interwar and post-war housing toward Anerley.
Streets we regularly draw for in Penge
Penge High Street · Maple Road · Croydon Road · Anerley Road
What SE20 is actually built of
Measured from 192 classified residential buildings in SE20, not from a description of the area.
Penge SE20 housing mix
Residential building form across the SE20 postcode district, from 192 classified buildings.
| Attached on more than one side | 55% |
|---|---|
| Attached on one side | 38% |
| Detached | 7% |
| Median building footprint | 58 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.99 |
| Buildings classified | 192 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Penge (SE20) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Penge SE20 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Bromley?+
Can I build a bigger extension because Bromley plots are larger?+
How does green-belt designation affect my Bromley project?+
How long does Bromley Council take to decide?+
How much do planning drawings cost in Bromley?+
Get your free Penge planning assessment
Tell us your Penge (SE20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.