MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportPlanning Drawings in Holloway N7

Rear dormer loft conversion on a Victorian terrace in Holloway N7, London Borough of Islington
Holloway · N7 · Islington

Planning Drawings in Holloway N7

Fixed-fee, MCIAT-chartered planning drawings for Holloway (N7) homeowners — London Borough of Islington validation and local constraints handled from the start.

Free Holloway planning assessment

Tell us your Holloway (N7) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Holloway (N7) in Islington runs along the Holloway Road spine, with residential Victorian streets on either side falling within conservation areas — most notably the St Mary Magdalene conservation area around the Grade II* church and its gardens between Holloway Road and Liverpool Road. That area carries an Article 4 direction, so householder works there need planning permission that similar homes elsewhere would not.

Beyond St Mary Magdalene, the Hillmarton and Mercers Road / Tavistock Terrace conservation areas cover further terraced streets off Holloway Road. We check whether a Holloway property sits inside the St Mary Magdalene Article 4 area or one of these conservation areas before advising whether a scheme can proceed under permitted development.

Rear dormer loft conversion on a Victorian terrace in Holloway N7, London Borough of Islington
Isometric illustration of a Holloway N7 home planning drawings design
Proposed floor plan
Holloway N7

Planning in Holloway (N7): what to know before you apply

N7 is the exception among these clusters: the St Mary Magdalene conservation area carries a confirmed Article 4 direction that withdraws selected householder permitted-development rights on the streets south of the church and west of Holloway Road, so works there require planning permission. The Hillmarton and Mercers Road / Tavistock Terrace conservation areas add further control. We confirm exactly which designation and Article 4 boundary a Holloway property falls in before recommending a route.

Typical Holloway housing stock

Mid- and late-Victorian terraces on the residential streets off Holloway Road — from modest two-storey terraces to taller villas around St Mary Magdalene Gardens and Hillmarton — with flats over shops and mansion blocks along Holloway Road and Camden Road.

Streets we regularly draw for in Holloway

Holloway Road · Hillmarton Road · Liverpool Road · Mercers Road

What N7 is actually built of

Measured from 332 classified residential buildings in N7, not from a description of the area.

Holloway N7 housing mix

Residential building form across the N7 postcode district, from 332 classified buildings.

Attached on more than one side75%
Attached on one side21%
Detached4%
Median building footprint64 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.54
Buildings classified332

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Planning Drawings for Holloway (N7) homes: the package and the process

A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.

We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.

The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.

What is included in a planning drawing set?

A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.

  • Site location plan (1:1250) and block plan (1:500)
  • Existing floor plans, elevations and sections
  • Proposed floor plans, elevations and sections
  • Roof plans where relevant, with heights and materials annotated
  • A design and access or heritage statement where the borough requires one

How are planning drawings different from building regulations drawings?

Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.

How quickly can you produce planning drawings in London?

After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.

What a London planning drawing set contains
DrawingTypical scaleWhat it shows
Site location plan1:1250The property in its street context, site edged red
Block plan1:500The building's footprint and position in the plot
Floor plans (existing & proposed)1:100 / 1:50Room layout, walls, openings and the proposed changes
Elevations (existing & proposed)1:100 / 1:50Each face of the building and how it changes
Sections1:100 / 1:50A cut through showing heights, levels and roof form
Sheet from a planning drawings package drawn for a Holloway property in N7, showing the existing and proposed arrangement at scale
A sheet from the planning drawings package we submit to London Borough of Islington for Holloway (N7) properties.
FAQ

Planning Drawings in Holloway N7 — FAQs

What scale should London planning drawings be?+
Site location plans are 1:1250, block plans 1:500, and floor plans, elevations and sections are typically 1:100 or 1:50. We format every drawing to your specific borough's requirements.
Do I need an architect to produce planning drawings?+
No. MCIAT-chartered architectural technologists produce the same council-accepted planning drawings with the same professional accountability, and councils assess the drawings, not the author's job title.
How many revisions are included in the fee?+
All of them. The fee is fixed and we redraw free until your council approves — revisions requested by a planning officer never cost you extra.
Can you draw from my existing plans?+
We can work from existing measured drawings, but for accuracy we usually carry out a laser survey so the proposed set matches your property exactly.
Do planning drawings guarantee approval?+
No drawing can guarantee a decision, but drawing to the local plan and validation checklist maximises your odds — and we redraw free until approval.
Do I need planning permission for an extension or loft in Islington?+
Usually, yes. Islington is among the most conservation-covered boroughs in London: Barnsbury, Canonbury and Duncan Terrace sit within designated areas where permitted development rights have largely been removed, so even modest external works often need a full application. We confirm the designation for your street first and design to the conservation-led expectations rather than assuming permitted development.
My Islington property is a converted flat — can I still extend?+
Often, but the flat-conversion context changes what is deliverable. Ownership, lease and party-wall considerations shape whether a rear or roof extension is possible, and the freeholder's agreement is usually needed alongside planning. We check the ownership and structural context before drawing so the scheme is realistic from the outset.
How does Islington's tight plot size affect what I can build?+
Many Islington terraces have limited rear-garden depth, so extension design is about making the most of a compact footprint — rooflights, careful massing and internal reconfiguration — rather than large additions. We design to the plot and the borough's amenity and party-wall expectations so neighbours' daylight and outlook are respected, which is what carries these applications.
How long does Islington Council take to decide?+
Islington determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. We prepare submissions to the council's validation checklist with the elevations and materials detail the council expects, to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Islington?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Islington approves. A conservation-area application and a flat-conversion scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Holloway planning assessment

Tell us your Holloway (N7) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.