Planning Drawings in Harlesden NW10
Fixed-fee, MCIAT-chartered planning drawings for Harlesden (NW10) homeowners — London Borough of Brent validation and local constraints handled from the start.
Harlesden (NW10) is a dense Victorian terraced neighbourhood built around the High Street and the landmark Jubilee Clock, with a high share of houses already converted to flats. That mix means the work here spans rear and side-return extensions, loft conversions and the drawings that go with flat-conversion and change-of-use schemes.
The Harlesden conservation area covers the historic core around the High Street, so frontage changes, dormers and materials there face tighter control than on the surrounding streets. We check where a Harlesden property sits relative to that boundary, and whether it is in single-family or flatted use, before recommending a route and preparing the application to Brent's standards.
Planning in Harlesden (NW10): what to know before you apply
NW10 has no published householder Article 4 direction in Harlesden affecting typical extensions, so many terraces retain permitted development rights — but the Harlesden conservation area around the High Street is the exception, and the high level of existing flat conversions means amenity and layout are scrutinised closely.
Typical Harlesden housing stock
Dense Victorian terraces radiating from the High Street and the Jubilee Clock, a large share already converted to flats, alongside pockets of later infill — a mix that makes both extensions and conversion-related work common.
Streets we regularly draw for in Harlesden
Tubbs Road · Craven Road · Winchelsea Road · Crownhill Road
What NW10 is actually built of
Measured from 424 classified residential buildings in NW10, not from a description of the area.
Harlesden NW10 housing mix
Residential building form across the NW10 postcode district, from 424 classified buildings.
| Attached on more than one side | 63% |
|---|---|
| Attached on one side | 33% |
| Detached | 4% |
| Median building footprint | 68 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.8 |
| Buildings classified | 424 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Harlesden (NW10) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Harlesden NW10 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a side-return extension in Brent?+
What does Brent's borough-wide HMO Article 4 direction affect?+
Is a hip-to-gable loft conversion allowed on my Brent semi?+
How long does Brent Council take to decide?+
How much do planning drawings cost in Brent?+
Get your free Harlesden planning assessment
Tell us your Harlesden (NW10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.