Planning Drawings in Ham & Petersham TW10
Fixed-fee, MCIAT-chartered planning drawings for Ham & Petersham (TW10) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
Ham & Petersham (TW10) sit between Richmond Park and the Thames, wrapped in conservation areas including Richmond Hill, Petersham, Ham Common and Ham House across a rare stretch of near-intact historic landscape.
The Richmond Hill conservation area lines The Vineyard, Ormond Road and Petersham Road with Georgian terraces, while Petersham's village core and the Ham Common frontages carry Article 4 protections on everyday alterations.
Planning in Ham & Petersham (TW10): what to know before you apply
Most period homes in TW10 fall inside the Richmond Hill, Petersham or Ham Common conservation areas, where Article 4 directions remove permitted-development rights and the protected Richmond Hill view limits massing — front, side and roof works should be assumed to need full planning permission.
Typical Ham & Petersham housing stock
Georgian terraces climbing Richmond Hill and lining The Vineyard, seventeenth- and eighteenth-century village houses through Petersham, and cottages fringing the common along Ham Street and Church Road.
Streets we regularly draw for in Ham & Petersham
The Vineyard · Ormond Road · Ham Street · Church Road · Petersham Road · Nightingale Lane
What TW10 is actually built of
Measured from 272 classified residential buildings in TW10, not from a description of the area.
Ham & Petersham TW10 housing mix
Residential building form across the TW10 postcode district, from 272 classified buildings.
| Attached on more than one side | 42% |
|---|---|
| Attached on one side | 41% |
| Detached | 16% |
| Median building footprint | 68 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.31 |
| Buildings classified | 272 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Ham & Petersham (TW10) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Ham & Petersham TW10 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free Ham & Petersham planning assessment
Tell us your Ham & Petersham (TW10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.