Planning Drawings in Battersea SW11
Fixed-fee, MCIAT-chartered planning drawings for Battersea (SW11) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.
Battersea (SW11) in Wandsworth runs from the prized 'between the commons' Victorian terraces near Clapham, through the shops of Lavender Hill and Northcote Road, down to the transformed Nine Elms riverside. On the terraced streets, side-return and rear extensions and loft conversions are the staple projects, and Wandsworth's design expectations for that consistent housing type are well documented.
Two conservation areas shape the district — Battersea Park around the park frontages, and the listed Shaftesbury Park Estate, a Victorian model-cottage estate where control over elevations and roofs is especially tight. We establish where a Battersea property sits relative to those boundaries, and the Thames flood zone near the river, before recommending a route and drawing to Wandsworth's residential guidance.
Planning in Battersea (SW11): what to know before you apply
SW11 has no householder Article 4 direction, so many Battersea terraces retain permitted development rights — but the Shaftesbury Park Estate model-cottage conservation area is a significant exception with tight elevation control, and riverside plots toward Nine Elms sit within the Thames flood zone.
Typical Battersea housing stock
Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.
Streets we regularly draw for in Battersea
Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill
What SW11 is actually built of
Measured from 432 classified residential buildings in SW11, not from a description of the area.
Battersea SW11 housing mix
Residential building form across the SW11 postcode district, from 432 classified buildings.
| Attached on more than one side | 81% |
|---|---|
| Attached on one side | 15% |
| Detached | 4% |
| Median building footprint | 67 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 3.56 |
| Buildings classified | 432 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Battersea (SW11) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Battersea SW11 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a side-return extension in Wandsworth?+
What does Wandsworth's basement Article 4 direction mean for me?+
How long will Wandsworth take to decide my application?+
Can you design an extension for a converted flat near the commons?+
How much do Wandsworth planning drawings cost?+
Get your free Battersea planning assessment
Tell us your Battersea (SW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.