MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportMansard Loft Conversion Drawings in Raynes Park SW20

Garage conversion and driveway on an interwar semi in Raynes Park SW20, London Borough of Merton
Raynes Park · SW20 · Merton

Mansard Loft Conversion Drawings in Raynes Park SW20

Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Raynes Park (SW20) homeowners — London Borough of Merton validation and local constraints handled from the start.

Free Raynes Park planning assessment

Tell us your Raynes Park (SW20) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Raynes Park (SW20) in Merton is a predominantly Edwardian and interwar suburb, running from the terraces around the station and Grand Drive to the semi-detached streets of West Wimbledon and Cottenham Park. The consistent interwar housing means side and rear additions and loft conversions follow a well-established pattern, and Merton's expectations for that house type are clearly documented.

The Wimbledon West conservation area toward Cottenham Park is the main designated control, governing frontages and roof changes for the houses inside its boundary. We confirm where a Raynes Park property sits relative to that boundary, and check for protected street trees, before recommending a permitted-development or full-application route and drawing to Merton's residential guidance.

Garage conversion and driveway on an interwar semi in Raynes Park SW20, London Borough of Merton
Isometric illustration of a Raynes Park SW20 home mansard loft conversion drawings design
Proposed floor plan
Raynes Park SW20

Planning in Raynes Park (SW20): what to know before you apply

SW20 has no householder Article 4 direction, so many Raynes Park houses retain permitted development rights for side, rear and loft work — but the Wimbledon West conservation area toward Cottenham Park is the exception, and Tree Preservation Orders apply to street trees on several suburban roads.

Typical Raynes Park housing stock

Edwardian terraces around Raynes Park station and the Grand Drive streets, interwar semi-detached houses across West Wimbledon and Cottenham Park, and 1930s shopping parades along the main roads.

Streets we regularly draw for in Raynes Park

Coombe Lane · Grand Drive · Worple Road · Approach Road

What SW20 is actually built of

Measured from 217 classified residential buildings in SW20, not from a description of the area.

Raynes Park SW20 housing mix

Residential building form across the SW20 postcode district, from 217 classified buildings.

Attached on more than one side53%
Attached on one side41%
Detached6%
Median building footprint68 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.25
Buildings classified217

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Mansard Loft Conversion Drawings for Raynes Park (SW20) homes: the package and the process

A mansard is a rebuild of the roof, so the drawings carry more structure than a dormer scheme: the new front and rear slopes with their pitch angles set out, the upstand and party wall junctions, the parapet and gutter detail, and a street-scene elevation showing the new roof against its neighbours.

That street scene usually decides the application. Where a terrace already has approved mansards, the drawing shows the new roof matching their line, pitch and window rhythm; where it would be the first, the case is made on the roof form itself. Either way the argument is drawn, not written.

Mansards belong to terraces and to parapeted stock. The form works because a near-vertical rear wall can rise off the party walls and sit behind a parapet, which is why it is the usual answer in tightly controlled streets and rarely the right answer on a detached house.

What is a mansard loft conversion?

A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.

Does a mansard loft conversion need planning permission in London?

Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.

Why do conservation areas favour mansards?

Many London conservation areas already contain mansard roofs as part of the original streetscape — grand Georgian and Victorian terraces were frequently built with a mansard attic storey behind a parapet, so a matching modern mansard often reads as a restoration of the intended roofline rather than an alteration. Getting that read right depends on matching the existing slate or tile colour, the proportion and spacing of the dormer windows, and the eaves and parapet detailing of the host terrace — details we design in from the first drawing rather than treating as an afterthought.

  • Slate or tile colour and coursing matched to the existing roof and neighbouring properties
  • Dormer window proportions and spacing aligned to the terrace's existing rhythm
  • Eaves, parapet and party wall junctions detailed to sit flush with neighbouring roofs
Typical mansard loft conversion drawing packages
PackageScopePlanning routeFee from
Rear mansard, planning onlyDesign, planning drawings and supporting statementHouseholder planning£1,600
Rear mansard, planning and building regsPlanning drawings plus structural and Part L detailingHouseholder planning£2,200
Front and rear mansardFull roof rebuild on both slopes, with structuralHouseholder planning£2,400
Sheet from a mansard loft conversion drawings package drawn for a Raynes Park property in SW20, showing the existing and proposed arrangement at scale
A sheet from the mansard loft conversion drawings package we submit to London Borough of Merton for Raynes Park (SW20) properties.
FAQ

Mansard Loft Conversion Drawings in Raynes Park SW20 — FAQs

How much do mansard loft conversion drawings cost in London?+
Planning drawings for a rear mansard typically start around £1,600. A combined planning and building regulations package, or a front-and-rear mansard, usually runs to around £2,200–£2,400 once structural calculations are included.
Can a mansard ever be permitted development?+
Rarely — because it changes the shape of the roof rather than adding within it, a mansard almost always exceeds permitted development tolerances. If you want to avoid a full application, ask us whether a dormer or hip-to-gable conversion would meet your space needs instead.
How long do mansard drawings take?+
A full planning drawing set is typically ready within about 10–14 days of survey, reflecting the extra design and consultation work a full roof rebuild involves. The statutory 8-week householder determination period then runs from validation.
Will a mansard need scaffolding and affect the whole roof?+
Yes — because the existing rear roof slope is removed and rebuilt, a mansard is a larger construction project than a dormer, and we design the sequencing and structural tie-ins with that in mind so your builder can programme the work efficiently.
Do you handle the party wall process as well as the drawings?+
We identify which neighbours require notice under the Party Wall etc. Act 1996 and provide the drawings needed to support the notice, so the party wall and planning processes can run in parallel rather than one waiting on the other.
Do I need planning permission for an extension in Merton?+
The interwar semis of Raynes Park and Morden often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
What is special about building at the John Innes estate in Merton Park?+
The John Innes estate is a planned Arts-and-Crafts conservation area with a distinctive character the council protects closely — materials, proportions and rooflines are all controlled. Permitted development is often restricted there, so we design to the estate's character and prepare a full, context-led application, which is the reliable route to approval.
What do Merton's HMO Article 4 directions affect?+
In designated wards, an Article 4 direction removes permitted development for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but if you are considering an HMO we confirm whether the direction covers your address and use before advising.
How long does Merton Council take to decide?+
Merton determines most householder applications within the statutory eight-week period once validated; Wimbledon and Merton Park conservation cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Merton?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Merton approves. A suburban Raynes Park extension and a Wimbledon Village or Merton Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Raynes Park planning assessment

Tell us your Raynes Park (SW20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.