Rear extension behind a detached inter-war house in suburban Upminster RM14 in Havering

Upminster · RM14 · Havering

Loft Conversion Drawings in Upminster RM14

Fixed-fee, MCIAT-chartered loft conversion drawings for Upminster (RM14) homeowners — London Borough of Havering validation and local constraints handled from the start.

Upminster (RM14) runs from a leafy Edwardian and inter-war suburb down to Corbets Tey, a surviving medieval village and one of the three settlements that originally formed Upminster. The Corbets Tey Conservation Area protects that village character, its listed buildings and its countryside-edge setting, so work there faces close conservation-area control.

Across the wider suburb the housing is mostly detached and semi-detached homes on good-sized plots, and rear extensions, side infills, loft conversions and garden rooms are the usual projects. Havering's householder guidance sets clear expectations, and matching them in the drawings is what gets RM14 schemes through first time.

Proposed floor plan

Upminster RM14

Upminster (RM14) — planning at a glance

Council: London Borough of Havering
Postcode district: RM14
Planning portal: View the Havering planning portal
Housing stock: The Corbets Tey village group of listed and historic buildings on the edge of open countryside, surrounded by the Edwardian and inter-war detached and semi-detached housing that makes up most of suburban Upminster.
Article 4: London Borough of Havering does not publish its Article 4 directions to the national planning register, so permitted development rights in Upminster (RM14) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No borough-wide Article 4 direction covers RM14 householder work; the Corbets Tey conservation-area control is the defining constraint.
Conservation: Corbets Tey
Sample streets: Corbets Tey Road · Harwood Hall Lane · Ockendon Road · Hall Lane
Local constraints: Corbets Tey Conservation Area — one of the three medieval settlements that formed Upminster, protecting its village character, the listed grade II group south of Harwood Hall Lane and the countryside-edge settingElevated village junction of Ockendon Road, Harwood Hall Lane and Corbets Tey Road where new build lines and heights are sensitiveGreen-belt and open-countryside edge to the south limiting how far development can extend beyond the built village

Planning in Upminster (RM14): what to know before you apply

No borough-wide Article 4 direction affects typical RM14 householder work, so many Upminster houses retain permitted development rights for rear and loft projects. The exception is the Corbets Tey Conservation Area, where the village character, listed group and countryside-edge setting mean external changes are controlled and permitted development is curtailed.

Typical Upminster housing stock

The Corbets Tey village group of listed and historic buildings on the edge of open countryside, surrounded by the Edwardian and inter-war detached and semi-detached housing that makes up most of suburban Upminster.

Streets we regularly draw for in Upminster

Corbets Tey Road · Harwood Hall Lane · Ockendon Road · Hall Lane

What RM14 is actually built of

Measured from 294 classified residential buildings in RM14, not from a description of the area.

Upminster RM14 housing mix

Residential building form across the RM14 postcode district, from 294 classified buildings.

Attached on more than one side	25%
Attached on one side	58%
Detached	17%
Median building footprint	82 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.14
Buildings classified	294

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Loft Conversion Drawings for Upminster (RM14) homes: the package and the process

A loft stands or falls on the section drawing. It has to prove usable head height along the length of the room, a staircase that meets the going and headroom rules without eating the landing below, floor joists sized for a habitable load rather than storage, and a means of escape that Building Control will accept — usually a protected stair, sometimes an escape window.

The same section does the planning work too, showing roof volume, ridge height and how the new form sits against the existing roof. Where the conversion relies on permitted development we set the volume out on the drawing as a calculation, so the position is evidenced rather than asserted.

Roof shape decides which conversion is even possible. A hipped roof has to become a gable before it offers full-width space; a shallow pitch may not deliver head height at any cost; and a terrace with a rear outrigger opens up an L-shaped option a detached house has no use for.

Do I need planning permission for a loft conversion in London?

Many loft conversions are permitted development, but volume limits (40m³ for terraced homes, 50m³ for detached and semi-detached), materials and the presence of a conservation area or Article 4 direction can change that. We assess your roof and borough and recommend the fastest lawful route — often a Lawful Development Certificate rather than a full planning application. A certificate is worth having even when the work is clearly permitted: it gives your buyer's solicitor and your building-control surveyor documentary proof the loft is lawful, which matters when you sell.

Which loft conversion type suits your roof?

The best conversion depends on your roof shape and the headroom it offers.

Dormer

A box dormer adds headroom and floor area at the rear and is the most common London loft — frequently permitted development.

Mansard

A mansard rebuilds the rear (or front and rear) roof slope for maximum space, common in conservation areas but usually needing planning permission.

Hip-to-gable

Extends a hipped roof to a vertical gable, ideal for semi-detached and end-of-terrace homes.

Velux / rooflight

The simplest option — rooflights within the existing roofline, almost always permitted development.

What building regulations apply to a loft conversion?

Loft conversions must meet fire escape, structural and insulation standards — a protected stairway, adequate floor joists and beams, and often a means of escape window. A loft that adds a third storey to a two-storey house triggers stricter fire-separation rules, including fire doors to habitable rooms off the new stairway. We coordinate the structural calculations with the drawings so the build proceeds without delays.

London loft conversion types, routes and typical fees
Loft type	Best for	Usual route	Fee from
Velux / rooflight	Roofs with existing headroom	Permitted development / LDC	£1,100
Dormer	Rear headroom + floor area	Permitted development / LDC	£1,300
Hip-to-gable	Semi and end-of-terrace roofs	Permitted development or planning	£1,600
Mansard	Maximum space, conservation areas	Full planning application	£2,200

Sheet from a loft conversion drawings package drawn for a Upminster property in RM14, showing the existing and proposed arrangement at scale — A sheet from the loft conversion drawings package we submit to London Borough of Havering for Upminster (RM14) properties.

Also in Upminster RM14

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings House Extension Drawings Loft Conversion Drawings across Havering Loft Conversion Drawings across London

FAQ

Loft Conversion Drawings in Upminster RM14 — FAQs

How much do loft conversion drawings cost in London?+

Drawing packages typically start around £1,100 for a permitted development loft and rise for mansards or full planning applications with structural calculations. We quote a fixed fee upfront.

Will my loft need a fire escape window?+

Most loft conversions require a means of escape and a protected stairway under building regulations. We design these in from the start.

Is a dormer loft permitted development?+

Often yes, within the volume limits and outside conservation areas — but we always check your specific property and borough first, free.

Can I convert my loft if I live in a conservation area?+

Usually yes, but conservation areas and Article 4 directions often remove permitted development for rear dormers, so the work needs a full planning application and a roof-form the council will accept — commonly a mansard or discreet rear dormer. We check your borough's designation before recommending a route.

Do you provide the structural calculations for the steels?+

Yes. Our full package includes structural drawings and calculations for the floor beams and any ridge or purlin steels, coordinated in-house so your builder can price and build without waiting on a separate engineer.

Do I need planning permission for an extension in Havering?+

Havering has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Green-belt land toward the east and conservation areas such as Upminster and Emerson Park restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

How does green-belt land affect my Havering project?+

On green-belt properties toward the borough's eastern and northern edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.

Can I build a bigger extension because Havering plots are larger?+

Often, yes. The generous interwar and detached plots across Hornchurch, Emerson Park and Upminster make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.

How long does Havering Council take to decide?+

Havering determines most householder applications within the statutory eight-week period once validated; green-belt and conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Havering drawings to the council's checklist to keep the application on track.

How much do planning drawings cost in Havering?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Havering approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Upminster planning assessment

Tell us your Upminster (RM14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.