MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Barkingside IG6

Kitchen extension interior with rear glazing in a Barkingside IG6 inter-war semi, London Borough of Redbridge
Barkingside · IG6 · Redbridge

House Extension Drawings in Barkingside IG6

Fixed-fee, MCIAT-chartered house extension drawings for Barkingside (IG6) homeowners — London Borough of Redbridge validation and local constraints handled from the start.

Free Barkingside planning assessment

Tell us your Barkingside (IG6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Barkingside (IG6) is a largely inter-war suburb, so most of the district's rear extensions, lofts and side infills sit on ordinary 1920s and 1930s semi-detached and terraced stock outside any heritage designation. That gives many IG6 houses reasonable permitted-development scope for household projects.

At its heart, though, is the Barnardo's Village conservation area on Tanners Lane — the surviving part of Dr Barnardo's Girls' Village Home, a horseshoe of Grade II-listed cottage homes built between 1876 and 1895 around a village green. Anything affecting those listed cottages or their setting needs listed-building consent as well as planning permission, a far tighter process than the surrounding streets.

Kitchen extension interior with rear glazing in a Barkingside IG6 inter-war semi, London Borough of Redbridge
Isometric illustration of a Barkingside IG6 home house extension drawings design
Proposed floor plan
Barkingside IG6

Planning in Barkingside (IG6): what to know before you apply

Redbridge keeps its Article 4 directions off planning.data.gov.uk, so we verify each IG6 address against the council's conservation-area and listed-building layers directly. The Barnardo's Village conservation area carries both conservation-area control and Grade II listings, so projects there are exceptional; across the wider inter-war suburb, standard rear and loft work is generally well supported.

Typical Barkingside housing stock

Mainly 1920s-1930s suburban semis and terraces typical of outer Redbridge, wrapped around the Barnardo's Village conservation area on Tanners Lane — a horseshoe of Grade II-listed cottage homes built for Dr Barnardo between 1876 and 1895 around a village green, with the Children's Church and Cairns House.

Streets we regularly draw for in Barkingside

Tanners Lane · Barnardo Drive · Horns Road · Fremantle Road · Mossford Green

What IG6 is actually built of

Measured from 275 classified residential buildings in IG6, not from a description of the area.

Barkingside IG6 housing mix

Residential building form across the IG6 postcode district, from 275 classified buildings.

Attached on more than one side53%
Attached on one side40%
Detached7%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.37
Buildings classified275

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

House Extension Drawings for Barkingside (IG6) homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
Sheet from a house extension drawings package drawn for a Barkingside property in IG6, showing the existing and proposed arrangement at scale
A sheet from the house extension drawings package we submit to London Borough of Redbridge for Barkingside (IG6) properties.
FAQ

House Extension Drawings in Barkingside IG6 — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for a loft conversion in Redbridge?+
On the Edwardian and interwar semis of Wanstead, Woodford and Barkingside, hip-to-gable and dormer lofts frequently qualify as permitted development within the volume limits, so a full application isn't always needed. Conservation areas such as Wanstead, Snaresbrook and the Ilford Garden Suburb restrict this. We check your street first and can confirm permitted development with a Lawful Development Certificate.
What does Redbridge's borough-wide HMO Article 4 direction affect?+
Redbridge applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.
What does the council expect for an extension in Wanstead or Woodford?+
The council pays close attention to preserving the rhythm and building line of its Edwardian and interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.
How long does Redbridge Council take to decide?+
Redbridge determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare Redbridge submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.
How much do planning drawings cost in Redbridge?+
We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Redbridge approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.
Free Fixed Quote

Get your free Barkingside planning assessment

Tell us your Barkingside (IG6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.