Flat Conversion Drawings in Greenwich SE10
Fixed-fee, MCIAT-chartered flat conversion drawings for Greenwich (SE10) homeowners — Royal Borough of Greenwich validation and local constraints handled from the start.
Greenwich (SE10) is among the most heritage-sensitive places to build in London: most of its period housing sits within one of the Royal Borough's conservation areas — West Greenwich, Greenwich Park, East Greenwich or the Ashburnham Triangle — and three of those carry Article 4 directions that pull nearly all external work into the planning system. Side-return and rear extensions on the Victorian and Georgian terraces are the staple, but they are judged carefully on materials, proportion and detail.
SE10 also sits within, or beside, the Maritime Greenwich World Heritage Site: the inscribed core is the Old Royal Naval College, Queen's House, Royal Observatory and Cutty Sark, with the surrounding streets in the buffer zone. That means townscape and setting weigh heavily on how schemes are assessed. We check exactly which conservation area — and which Article 4 direction — applies to a Greenwich address before advising on a permitted-development or full-application route.
Planning in Greenwich (SE10): what to know before you apply
Most SE10 houses fall inside the West Greenwich, Greenwich Park, East Greenwich or Ashburnham Triangle conservation areas, and the first three carry Article 4 directions removing permitted-development rights for re-roofing, windows, doors and other external changes. The Maritime Greenwich World Heritage Site and its buffer zone add further townscape scrutiny. We confirm the conservation area and Article 4 status for a specific property before recommending a route and drawing to the Royal Borough's guidance.
Typical Greenwich housing stock
Georgian and early-Victorian terraces around Royal Hill and Crooms Hill, the Victorian terraces of the Ashburnham Triangle, and the streets of West and East Greenwich framing the town centre and Greenwich Park.
Streets we regularly draw for in Greenwich
Royal Hill · Crooms Hill · Ashburnham Grove · Gloucester Circus
What SE10 is actually built of
Measured from 310 classified residential buildings in SE10, not from a description of the area.
Greenwich SE10 housing mix
Residential building form across the SE10 postcode district, from 310 classified buildings.
| Attached on more than one side | 70% |
|---|---|
| Attached on one side | 26% |
| Detached | 4% |
| Median building footprint | 54 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.79 |
| Buildings classified | 310 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Greenwich (SE10) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Greenwich SE10 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for an extension in Greenwich?+
How does the Maritime Greenwich World Heritage Site affect my project?+
Can I extend a home in Blackheath or Westcombe Park?+
How long does the Royal Borough of Greenwich take to decide?+
How much do planning drawings cost in Greenwich?+
Get your free Greenwich planning assessment
Tell us your Greenwich (SE10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.