Flat Conversion Drawings in Bow E3
Fixed-fee, MCIAT-chartered flat conversion drawings for Bow (E3) homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.
Bow (E3) in Tower Hamlets is defined by Tredegar Square — the most complete Georgian square in the East End, and the reason a substantial share of E3 householder work is governed by listed building consent rather than permitted development. The surrounding stock is largely Victorian terrace along Bow Road and the Roman Road, with post-war estates filling the gaps.
The Tredegar Square conservation area closely controls frontages, railings and rooflines, and many of the houses in and around the square are listed, which means external alterations need listed building consent alongside planning. Fairfield Road covers the historic industrial frontages including the former Bryant and May match factory, where conversion schemes are assessed against that industrial character, and the Tower Hamlets Cemetery conservation area brings tree protection and setting considerations to the streets nearby. We check listing and designation for an E3 address before drawing to Tower Hamlets' guidance.
Planning in Bow (E3): what to know before you apply
E3 has no householder Article 4 direction, so unlisted Bow houses outside the conservation areas retain permitted development rights for rear and loft work. The controls that matter are elsewhere: Tredegar Square is a substantially complete Georgian square where many houses are listed and listed building consent governs external alterations; Fairfield Road protects the historic industrial frontages including the former match factory; and the Tower Hamlets Cemetery conservation area adds tree and setting considerations to the surrounding streets.
Typical Bow housing stock
Georgian terraces around Tredegar Square — the most complete Georgian square in the East End — with Victorian terraces along the Roman Road and Bow Road, and post-war estates between them.
Streets we regularly draw for in Bow
Bow Road · Roman Road · Tredegar Square · Fairfield Road
What E3 is actually built of
Measured from 396 classified residential buildings in E3, not from a description of the area.
Bow E3 housing mix
Residential building form across the E3 postcode district, from 396 classified buildings.
| Attached on more than one side | 78% |
|---|---|
| Attached on one side | 16% |
| Detached | 5% |
| Median building footprint | 53 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 4.49 |
| Buildings classified | 396 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Bow (E3) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Bow E3 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for an extension in Tower Hamlets?+
My Tower Hamlets property is listed — what consent do I need?+
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
How long does Tower Hamlets Council take to decide?+
How much do planning drawings cost in Tower Hamlets?+
Get your free Bow planning assessment
Tell us your Bow (E3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.