MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Camden

Historic Hampstead townhouses in the London Borough of Camden, a heavily conservation-controlled area
Camden · London

Double Storey Extension Drawings in Camden

Fixed-fee, MCIAT-chartered double storey extension drawings for Camden homeowners — London Borough of Camden validation and local constraints handled from the start.

Free Camden planning assessment

Tell us your Camden address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Camden is one of London's most heritage-dense and design-scrutinised boroughs: much of its housing sits within conservation areas such as Hampstead, Belsize, Primrose Hill, Fitzroy Square, Bloomsbury and Dartmouth Park, or is listed outright, and the council applies detailed control to rear extensions, dormers, materials and — above all — basements. The stock ranges from Georgian and early-Victorian townhouses and stucco-fronted terraces to Hampstead's Arts-and-Crafts housing, mansion blocks and the Victorian terraces of Kentish Town and Gospel Oak. In Hampstead, Belsize Park and Primrose Hill especially, applications reward drawings that respond precisely to the local townscape rather than a standard template.

Because near-borough-wide conservation coverage sits alongside a high density of listed buildings in Hampstead, Bloomsbury and Fitzrovia, permitted development cannot be assumed for roof alterations, front elevations or many rear works — a full householder application, and often listed-building consent, is usually needed. Camden also operates one of the most rigorous basement policies in London: any basement or lower-ground extension generally requires a Basement Impact Assessment addressing structural stability, drainage and groundwater. We take a validation-first approach, screening the conservation-area, listing and basement position for your exact address before a line is drawn, and coordinating the Basement Impact Assessment where a below-ground scheme is involved.

We prepare Camden planning and listed-building submissions to the council's validation and design standards across Camden Town, Kentish Town, West Hampstead and the wider borough, producing the same council-accepted drawings an architect would — usually at around 30% less. The fee is agreed up front and fixed, drawings typically turn around in about seven days, and we redraw free until Camden approves. Most householder applications are determined within the statutory eight-week period once validated, though basement, conservation and listed-building cases can attract additional consultation, so a complete, correctly scaled submission is the best defence against delay.

Historic Hampstead townhouses in the London Borough of Camden, a heavily conservation-controlled area
Isometric illustration of a Camden home extension design
Proposed floor plan
Camden

Planning in Camden: what to know before you apply

Camden operates one of the most rigorous basement policies in London: schemes involving a basement or lower-ground extension generally require a Basement Impact Assessment addressing structural stability, drainage and groundwater. Add near-borough-wide conservation coverage and a high proportion of listed buildings, and permitted development cannot be assumed — we confirm the exact constraints before drawing.

Typical Camden housing stock

Georgian and early-Victorian townhouses, Hampstead's historic and Arts-and-Crafts housing, stucco-fronted terraces and mansion blocks, and Victorian terraces across Kentish Town and Gospel Oak.

Areas we regularly draw for in Camden

Hampstead · Camden Town · Kentish Town · Belsize Park · Primrose Hill · Bloomsbury · Gospel Oak · West Hampstead

What the numbers say about Camden planning decisions

These are London Borough of Camden’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

Permitted development in Camden

Larger householder extensions put to London Borough of Camden under the prior-approval route, and lawful-development certificates decided, over eight quarters.

Prior approval not requiredWent ahead without a full application1
Prior approval granted6
Prior approval refused1
Building upwards, prior approval refused0
Certificates of lawful development decided247

Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.

What removes permitted development in Camden

Live entries on the national planning registers for London Borough of Camden. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.

Article 4 directions in force21
Areas they coverOne direction can cover many separate areas21
Conservation areasPermitted development is already narrower inside one40

Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.

Double Storey Extension Drawings for Camden homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package prepared for a Camden property, drawn to London Borough of Camden validation standards
A sheet from the double storey extension drawings package we submit to London Borough of Camden.
FAQ

Double Storey Extension Drawings in Camden — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for a rear extension in Camden?+
Frequently, yes. Much of Camden sits within a conservation area or is listed, and near-borough-wide conservation coverage removes permitted development for many external works. On unlisted homes outside a conservation area a rear extension may still qualify, but in Hampstead, Belsize Park and Primrose Hill a full application is usually needed. We confirm the exact constraints for your address before drawing.
What is a Basement Impact Assessment and will I need one in Camden?+
Camden operates one of the most rigorous basement policies in London. Schemes involving a basement or lower-ground extension generally require a Basement Impact Assessment addressing structural stability, drainage and groundwater. If you are considering below-ground space we flag the requirement early and coordinate the assessment so the application is complete when it is submitted.
Can I make changes to a listed building in Camden?+
Often, but listed-building consent is usually required alongside — or instead of — planning permission, and internal as well as external changes can be controlled. Camden has a high density of listed buildings in Hampstead, Bloomsbury and Fitzrovia. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
How long does Camden take to decide an application?+
Camden determines most householder applications within the statutory eight-week period once validated; basement, conservation and listed-building cases can involve additional consultation. We prepare Camden submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Camden?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Camden approves. A conservation-area rear extension, a basement and a listed-building scheme differ in the evidence required, so we quote once we have seen your project rather than by the hour.
Free Fixed Quote

Get your free Camden planning assessment

Tell us your Camden address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.