Wraparound Extension Drawings in Notting Hill W11
Fixed-fee, MCIAT-chartered wraparound extension drawings for Notting Hill (W11) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
Notting Hill (W11) in Kensington and Chelsea is built around its communal garden squares. The Norland and Avondale conservation areas protect that layout — mid-Victorian stucco terraces arranged so their rear elevations face a shared garden rather than individual private ones. That single fact changes the arithmetic of a rear extension here: the elevation you are altering is seen from a protected communal space, and it is assessed accordingly.
Kensington and Chelsea's Article 4 directions do the rest. Basement work has had its permitted development rights removed, so the deep lower-ground schemes W11 is known for need a full planning application from the outset. A second direction covers minor alterations in conservation areas including works to windows, so replacing windows on a stucco frontage needs permission in its own right. A third removes permitted development rights for commercial to residential conversion. Many W11 addresses are also flats within subdivided houses, which carry no permitted development rights regardless. We establish the garden-square context, the tenure and which directions apply before drawing to the borough's guidance.
Planning in Notting Hill (W11): what to know before you apply
W11 sits within the Norland and Avondale conservation areas, which protect a layout of mid-Victorian stucco terraces built around communal garden squares — so rear elevations face a shared protected garden and are assessed against that setting. Kensington and Chelsea's Article 4 directions remove permitted development rights for basements, for minor alterations in conservation areas including works to windows, and for commercial to residential conversion. Basement schemes and window replacement therefore both need a full planning application. Many addresses are flats within subdivided houses, which have no permitted development rights in any case.
Typical Notting Hill housing stock
Mid-Victorian stucco-fronted terraces laid out around communal garden squares, built as single houses and now a mix of whole houses and large subdivided flats.
Streets we regularly draw for in Notting Hill
Portobello Road · Lansdowne Road · Elgin Crescent · Clarendon Road
What W11 is actually built of
Measured from 146 classified residential buildings in W11, not from a description of the area.
Notting Hill W11 housing mix
Residential building form across the W11 postcode district, from 146 classified buildings.
| Attached on more than one side | 84% |
|---|---|
| Attached on one side | 13% |
| Detached | 3% |
| Median building footprint | 75 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.65 |
| Buildings classified | 146 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Notting Hill (W11) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Notting Hill W11 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free Notting Hill planning assessment
Tell us your Notting Hill (W11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.