Wraparound Extension Drawings in Marylebone W1U
Fixed-fee, MCIAT-chartered wraparound extension drawings for Marylebone (W1U) homeowners — Westminster City Council validation and local constraints handled from the start.
Marylebone (W1U) sits on the Portman and Howard de Walden estates, and the work is characteristically internal reconfiguration, mansion-flat alterations and change of use — nowhere more so than the Harley Street medical district, where consulting-room, office and residential uses are finely balanced. The terraced grain is consistent and closely protected, so schemes turn on sensitive interiors and correct use classification rather than external enlargement.
With the Harley Street, Portman Estate and East Marylebone conservation areas overlapping much of the district and many buildings listed, most projects involve conservation-area or listed-building consent, and the estate freeholders impose their own consent regime. We confirm the estate, listing grade and conservation boundary before drawing and prepare the application to Westminster City Council's validation standard.
Planning in Marylebone (W1U): what to know before you apply
There is no published householder Article 4 direction driving decisions in W1U; the real controls are the overlapping conservation areas, widespread listing, the Harley Street change-of-use context and the Portman and Howard de Walden estates' freeholder consent requirements, all of which we address alongside the council submission.
Typical Marylebone housing stock
Brick and stucco terraces laid out for the Portman and Howard de Walden estates, including the Harley Street medical quarter and generous mansion flats, with a strong grain of Georgian townhouses converted to consulting rooms, offices and apartments.
Streets we regularly draw for in Marylebone
Harley Street · Margaret Street · Foley Street · Cleveland Street
What the wider borough is built of
W1U has too few classified residential buildings to publish a district figure of its own, so we do not estimate one. The measured figures below are borough-wide and W1U is not among the districts they cover.
Borough-wide building mix
Residential building form across 5 of the borough's 6 postcode districts, from 1,043 classified buildings. W1U is below the publication floor and is excluded from these totals, so they describe the borough around it rather than the district itself.
| Attached on more than one side | 88% |
|---|---|
| Attached on one side | 9% |
| Detached | 2% |
| Buildings attached on more than one side | 921 |
| Detached buildings | 26 |
| Buildings classified | 1,043 |
| Postcode districts measured | 5 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Marylebone (W1U) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Marylebone W1U — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for works in Westminster?+
I live in a mansion block — what extra consent might I need?+
Will I need a Basement Impact Assessment in Westminster?+
How long does Westminster City Council take to decide?+
How much do planning drawings cost in Westminster?+
Get your free Marylebone planning assessment
Tell us your Marylebone (W1U) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.