Wraparound Extension Drawings in Kidbrooke SE3
Fixed-fee, MCIAT-chartered wraparound extension drawings for Kidbrooke (SE3) homeowners — Royal Borough of Greenwich validation and local constraints handled from the start.
Kidbrooke (SE3) is a district defined by change: the system-built Ferrier Estate has been cleared and rebuilt as Kidbrooke Village, one of the largest housing regeneration schemes in south-east London, ringed by surviving interwar and postwar suburban housing. Householder extension and loft work concentrates on those older semi-detached and terraced houses on the fringes, where drawings have to respond to a genuinely mixed streetscape.
There is no conservation area covering Kidbrooke — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the scale of the ongoing regeneration and by the varied older housing around it, read against the Royal Borough of Greenwich's householder design expectations. We treat the immediate context of each house, rather than a conservation designation, as the reference point when we design an extension.
Across streets like Westbrook Road, Dursley Road and Whetstone Road, demand is steady for rear extensions, side infills and loft conversions on the interwar and postwar houses. We check each property's permitted-development position against Greenwich's borough-wide controls — and, on newer Kidbrooke Village homes, any developer conditions or covenants — before preparing drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Kidbrooke (SE3): what to know before you apply
Greenwich assesses Kidbrooke extensions against the immediate context, which varies from new-build village blocks to older interwar and postwar houses, so the design has to respond to each house rather than a single estate pattern. There is no conservation area and no local Article 4 direction, so many older houses retain permitted development rights for rear and loft work — but on newer homes, developer conditions and covenants can restrict alterations, and neighbour amenity and building lines remain the points a householder application is judged on.
Typical Kidbrooke housing stock
A rapidly changing mix of new-build Kidbrooke Village apartments and houses alongside surviving interwar and postwar semi-detached and terraced homes on the fringes. The suburban houses around the regeneration area are where most householder extension and loft work happens.
Streets we regularly draw for in Kidbrooke
Blackheath Park · Charlton Park Lane · Morden Road · Sweyn Place · Paddock Close · The Lane · The Hall · Liskeard Gardens · Westbrook Road · St Germans Place · Dursley Road · Whetstone Road
What SE3 is actually built of
Measured from 411 classified residential buildings in SE3, not from a description of the area.
Kidbrooke SE3 housing mix
Residential building form across the SE3 postcode district, from 411 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 41% |
| Detached | 16% |
| Median building footprint | 67 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.2 |
| Buildings classified | 411 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Kidbrooke (SE3) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Kidbrooke SE3 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission to extend a house in Kidbrooke?+
Is Kidbrooke in a conservation area?+
How much do planning and building-regulation drawings cost for a Kidbrooke extension?+
How long does the Royal Borough of Greenwich take to decide?+
Get your free Kidbrooke planning assessment
Tell us your Kidbrooke (SE3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.