Wraparound Extension Drawings in Hammersmith & Fulham
Fixed-fee, MCIAT-chartered wraparound extension drawings for Hammersmith & Fulham homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
Hammersmith & Fulham is classic terraced West London. Long Victorian and Edwardian grids across Fulham and Shepherd's Bush make side-return and rear extensions, loft conversions and basements the most requested projects, and the council's design expectations for these house types are well established. Around them sit the distinctive red-brick 'Lion houses' of the Peterborough Estate, Edwardian mansion blocks, and newer riverside development along the Thames through Sands End, with Parsons Green, Brook Green, Hammersmith and White City each adding their own grain to the borough.
The controls that matter here are layered. The council operates a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater, and Thames-side flood-zone considerations apply near the river. Strong conservation control runs across Bishops Park, Peterborough Estate, Brackenbury, Ravenscourt Park, Bradmore and Crabtree, and Article 4 directions remove permitted development for HMO conversions and, in conservation areas, some basement and frontage works. We confirm exactly which of these apply to your exact address before drawing.
We draw Hammersmith & Fulham planning applications to the borough's residential extension and basement guidance, coordinating structural calculations in-house so party-wall-sensitive terraces and below-ground schemes are handled cleanly and are complete when submitted. On the dense grids we check permitted development first and confirm it with a Lawful Development Certificate where a side-return or rear extension qualifies, and on the Peterborough Estate we design to the 'Lion houses' character. The fee is fixed and agreed up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until the council approves. Most householder applications are decided within the statutory eight-week period once validated, so we submit validation-first.
Planning in Hammersmith & Fulham: what to know before you apply
Hammersmith & Fulham applies a basement policy requiring a basement impact assessment for below-ground works, and controls design closely within its conservation areas and on the Peterborough Estate. Article 4 directions remove permitted development for HMO conversions in parts of the borough. We confirm the constraints for your exact address before drawing.
Typical Hammersmith & Fulham housing stock
Long grids of Victorian and Edwardian terraces across Fulham and Shepherd's Bush, the distinctive red-brick 'Lion houses' of the Peterborough Estate, Edwardian mansion blocks, and newer riverside development along the Thames.
Areas we regularly draw for in Hammersmith & Fulham
Fulham · Shepherd's Bush · Hammersmith · Parsons Green · Sands End · Brook Green · White City
What the numbers say about Hammersmith & Fulham planning decisions
These are London Borough of Hammersmith & Fulham’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Hammersmith & Fulham
Larger householder extensions put to London Borough of Hammersmith & Fulham under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 0 |
|---|---|
| Prior approval granted | 5 |
| Prior approval refused | 1 |
| Building upwards, prior approval refused | 1 |
| Certificates of lawful development decided | 168 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Hammersmith & Fulham
Live entries on the national planning registers for London Borough of Hammersmith & Fulham. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Conservation areasPermitted development is already narrower inside one | 47 |
|---|
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Hammersmith & Fulham homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Hammersmith & Fulham
Wraparound Extension Drawings in Hammersmith & Fulham — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free Hammersmith & Fulham planning assessment
Tell us your Hammersmith & Fulham address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.