Wraparound Extension Drawings in Cricklewood NW2
Fixed-fee, MCIAT-chartered wraparound extension drawings for Cricklewood (NW2) homeowners — London Borough of Brent validation and local constraints handled from the start.
Cricklewood (NW2) in Brent splits into two quite different halves for planning purposes. The Mapesbury streets — Mapesbury Road, Anson Road and their neighbours — are large late-Victorian and Edwardian villas inside the Mapesbury conservation area, and Brent has an Article 4 direction covering it. The Broadway side is denser Victorian terrace and interwar stock.
The Mapesbury Article 4 direction is the decisive fact for anyone working on the villa streets: it removes permitted development rights across the conservation area, so rear and roof projects there need a full planning application rather than proceeding under permitted development. Separately, Brent's HMO Article 4 directions remove the permitted change to small houses in multiple occupation across the district, so an NW2 HMO conversion needs planning permission — a common trip-up on the larger villas, which are exactly the properties people try to convert. We check whether an NW2 address is inside the Mapesbury boundary before drawing to Brent's guidance.
Planning in Cricklewood (NW2): what to know before you apply
NW2 carries the Mapesbury Article 4 direction, which removes permitted development rights across the Mapesbury conservation area — so rear and loft projects on those villa streets need a full planning application, not permitted development. Brent's HMO Article 4 directions separately remove the permitted change to small houses in multiple occupation across the district, meaning any NW2 HMO conversion requires planning permission. Outside the Mapesbury boundary, the Broadway-side terraces retain more permitted development scope.
Typical Cricklewood housing stock
Large late-Victorian and Edwardian villas and semi-detached houses on the Mapesbury streets, with denser Victorian terraces and interwar housing along the Broadway and toward the north.
Streets we regularly draw for in Cricklewood
Cricklewood Broadway · Cricklewood Lane · Mapesbury Road · Anson Road
What NW2 is actually built of
Measured from 414 classified residential buildings in NW2, not from a description of the area.
Cricklewood NW2 housing mix
Residential building form across the NW2 postcode district, from 414 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 49% |
| Detached | 8% |
| Median building footprint | 78 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.27 |
| Buildings classified | 414 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Cricklewood (NW2) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Cricklewood NW2 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a side-return extension in Brent?+
What does Brent's borough-wide HMO Article 4 direction affect?+
Is a hip-to-gable loft conversion allowed on my Brent semi?+
How long does Brent Council take to decide?+
How much do planning drawings cost in Brent?+
Get your free Cricklewood planning assessment
Tell us your Cricklewood (NW2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.