Wraparound Extension Drawings in Clerkenwell EC1R
Fixed-fee, MCIAT-chartered wraparound extension drawings for Clerkenwell (EC1R) homeowners — London Borough of Islington validation and local constraints handled from the start.
Clerkenwell (EC1R) sits at the southern edge of Islington, where the housing is dominated by former Georgian and Victorian workshops, warehouses and print-trade buildings now converted to flats and live/work lofts. Reconfiguration, loft and mansard additions and change-of-use applications are far more common here than the rear extensions typical of Islington's residential streets, and Islington's design expectations for this historic fabric are demanding.
Much of the neighbourhood falls within or beside conservation areas such as Charterhouse Square, Hatton Garden and Smithfield, so alterations to facades, windows and rooflines face tight control. We establish exactly where a Clerkenwell property sits against those boundaries before drawing, and prepare the application to Islington's validation and design standards so it is assessed without a query.
Planning in Clerkenwell (EC1R): what to know before you apply
EC1R has no published householder Article 4 direction affecting typical residential work, but Clerkenwell's dense conservation coverage and its high proportion of converted warehouse and workshop buildings mean permitted development cannot be assumed — mansard, roof-terrace and change-of-use proposals are the ones most closely scrutinised.
Typical Clerkenwell housing stock
Converted Georgian and Victorian workshops, warehouses and print-trade buildings turned into flats and live/work lofts, interspersed with surviving terraces and a handful of newer infill blocks between Farringdon and the City Road end.
Streets we regularly draw for in Clerkenwell
Duncan Terrace · Laystall Street · Graham Street · Doughty Street
What the wider borough is built of
EC1R has too few classified residential buildings to publish a district figure of its own, so we do not estimate one. The measured figures below are borough-wide and EC1R is not among the districts they cover.
Borough-wide building mix
Residential building form across 3 of the borough's 4 postcode districts, from 1,096 classified buildings. EC1R is below the publication floor and is excluded from these totals, so they describe the borough around it rather than the district itself.
| Attached on more than one side | 74% |
|---|---|
| Attached on one side | 21% |
| Detached | 5% |
| Buildings attached on more than one side | 809 |
| Detached buildings | 52 |
| Buildings classified | 1,096 |
| Postcode districts measured | 3 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Clerkenwell (EC1R) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Clerkenwell EC1R — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension or loft in Islington?+
My Islington property is a converted flat — can I still extend?+
How does Islington's tight plot size affect what I can build?+
How long does Islington Council take to decide?+
How much do planning drawings cost in Islington?+
Get your free Clerkenwell planning assessment
Tell us your Clerkenwell (EC1R) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.