Wraparound Extension Drawings in Belsize Park NW3
Fixed-fee, MCIAT-chartered wraparound extension drawings for Belsize Park (NW3) homeowners — London Borough of Camden validation and local constraints handled from the start.
Belsize Park in NW3 is a conservation-controlled quarter of substantial Victorian villas and Edwardian mansion flats climbing toward Hampstead Heath. Most instructions here are rear and side-return extensions, full loft conversions and the reconfiguration of large houses already split into flats, all needing carefully evidenced householder or full planning applications.
Because the Belsize and Parkhill conservation areas govern almost every elevation, we draw schemes that keep original roof lines, window rhythm and stucco or brick detailing intact, and prepare the design-and-access justification Camden Council expects for heritage-sensitive alterations before anything is submitted.
Planning in Belsize Park (NW3): what to know before you apply
There is no published householder Article 4 direction here, but conservation-area designation removes much permitted development and makes materials, rooflines and rear-extension depth the decisive issues; near-Heath tree protection is common.
Typical Belsize Park housing stock
Large stucco-fronted and red-brick Victorian villas, many long since subdivided into flats, sit alongside purpose-built Edwardian mansion blocks. Generous rear gardens back onto the streets running up towards Parliament Hill and Hampstead Heath.
Streets we regularly draw for in Belsize Park
South Hill Park · Constantine Road · Roderick Road · Courthope Road
What NW3 is actually built of
Measured from 237 classified residential buildings in NW3, not from a description of the area.
Belsize Park NW3 housing mix
Residential building form across the NW3 postcode district, from 237 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 37% |
| Detached | 20% |
| Median building footprint | 92 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.82 |
| Buildings classified | 237 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Belsize Park (NW3) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Belsize Park NW3 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Belsize Park planning assessment
Tell us your Belsize Park (NW3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.