Wraparound Extension Drawings in Barnet
Fixed-fee, MCIAT-chartered wraparound extension drawings for Barnet homeowners — London Borough of Barnet validation and local constraints handled from the start.
Barnet's housing is dominated by interwar semi-detached suburbia across Finchley, Hendon and Edgware — homes ideal for hip-to-gable and dormer loft conversions and rear extensions, which frequently qualify as permitted development on semi-detached houses within the volume limits. But the borough also contains Hampstead Garden Suburb, one of the most tightly controlled residential areas in the country, so the correct route depends entirely on which part of Barnet you are in rather than on the house type alone.
Within the Suburb, an Article 4 direction removes almost all permitted development rights — one of the most far-reaching in London — and the Hampstead Garden Suburb Trust must also consent to external changes in parallel with the London Borough of Barnet. The borough's other conservation areas, Mill Hill, Monken Hadley, Totteridge and Finchley Church End, apply their own controls on 1930s semi character and front elevations, and the greens at Totteridge and Monken Hadley add further sensitivity. Elsewhere, Barnet's interwar semis usually retain permitted development rights for rear extensions and lofts.
We tailor Barnet applications to the specific area: straightforward permitted-development lofts and extensions across Finchley and Edgware, confirmed with a Lawful Development Certificate where they qualify, and carefully evidenced full applications within the Suburb and conservation areas. In the Suburb we handle both tracks — a design-led planning application to Barnet and the Trust's requirements — since approval there depends on respecting the Arts-and-Crafts character precisely. The fee is fixed and agreed up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Barnet approves. Drawing to the validation checklist, and turning drawings around in roughly seven days, keeps most householder applications inside the statutory eight-week determination, with the elevations and materials detail the council expects.
Planning in Barnet: what to know before you apply
The Hampstead Garden Suburb Article 4 direction is among the most far-reaching in London, controlling almost all external alterations and requiring Hampstead Garden Suburb Trust consent in parallel with planning. Elsewhere, Barnet's 1930s semis usually retain permitted development rights for rear extensions and lofts.
Typical Barnet housing stock
1930s semi-detached suburbia across Finchley, Hendon and Edgware, with the nationally significant Arts-and-Crafts housing of Hampstead Garden Suburb.
Areas we regularly draw for in Barnet
Finchley · Edgware · Hendon · Golders Green · Mill Hill · Chipping Barnet · Whetstone
What the numbers say about Barnet planning decisions
These are London Borough of Barnet’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Barnet
Larger householder extensions put to London Borough of Barnet under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 364 |
|---|---|
| Prior approval granted | 30 |
| Prior approval refused | 210 |
| Granted where a decision was neededFrom 240 determinations | 12% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 1,664 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Barnet
Live entries on the national planning registers for London Borough of Barnet. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 15 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 48 |
| Conservation areasPermitted development is already narrower inside one | 16 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Barnet homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Barnet
Wraparound Extension Drawings in Barnet — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a loft or extension in Barnet?+
What is different about building in Hampstead Garden Suburb?+
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
How long does Barnet take to decide an application?+
How much do Barnet planning drawings cost?+
Get your free Barnet planning assessment
Tell us your Barnet address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.