MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in Sands End SW6

Rear extension on a late-Victorian artisan terrace in Sands End SW6 near Imperial Wharf, London Borough of Hammersmith and Fulham
Sands End · SW6 · Hammersmith & Fulham

Side Return Extension Drawings in Sands End SW6

Fixed-fee, MCIAT-chartered side return extension drawings for Sands End (SW6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Sands End planning assessment

Tell us your Sands End (SW6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Sands End (SW6) is Fulham's riverside corner, where grids of late-Victorian artisan terraces meet the modern Imperial Wharf development, in the London Borough of Hammersmith & Fulham. The character is genuinely mixed, so projects run from side-return and rear extensions and lofts on the terraces to internal alterations and fit-outs in the newer riverside flats.

The Sands End and Imperial Square & Gasworks conservation areas protect the historic terraced core and the area's industrial-riverside heritage, with Hurlingham and Moore Park at the edges, so frontage and roofline changes on the older houses are controlled. Flat alterations bring freeholder consent and party-wall matters on top of the planning position, so we establish whether an address is period house or leasehold flat before drawing to Hammersmith & Fulham's standards.

Rear extension on a late-Victorian artisan terrace in Sands End SW6 near Imperial Wharf, London Borough of Hammersmith and Fulham
Isometric illustration of a Sands End SW6 home side return extension drawings design
Proposed floor plan
Sands End SW6

Planning in Sands End (SW6): what to know before you apply

SW6 Sands End has no published householder Article 4 direction, but the Sands End and Imperial Square & Gasworks conservation areas cover the terraced core and riverside heritage, with Hurlingham and Moore Park nearby, so frontage and roofline changes are controlled. Modern flats do not carry the permitted development rights of houses, so alterations there are assessed as full planning alongside freeholder consent.

Typical Sands End housing stock

A mixed riverside district — grids of late-Victorian artisan terraces around Sands End Lane and Hugon Road sitting alongside the modern Imperial Wharf flats — so the work ranges from side-return and rear house extensions to leasehold flat alterations and fit-outs.

Streets we regularly draw for in Sands End

Hugon Road · Breer Street · Dymock Street · Daisy Lane

What SW6 is actually built of

Measured from 530 classified residential buildings in SW6, not from a description of the area.

Sands End SW6 housing mix

Residential building form across the SW6 postcode district, from 530 classified buildings.

Attached on more than one side85%
Attached on one side13%
Detached2%
Median building footprint72 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.7
Buildings classified530

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Sands End (SW6) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Sands End property in SW6, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Hammersmith & Fulham for Sands End (SW6) properties.

Also in Sands End SW6

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across Hammersmith & FulhamSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in Sands End SW6 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Sands End planning assessment

Tell us your Sands End (SW6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.