Rush Green · RM7 · Havering

Side Return Extension Drawings in Rush Green RM7

Fixed-fee, MCIAT-chartered side return extension drawings for Rush Green (RM7) homeowners — London Borough of Havering validation and local constraints handled from the start.

Rush Green (RM7) is an interwar residential suburb straddling the boundary between the London Boroughs of Havering and Barking & Dagenham along Rush Green Road, built up largely in the 1920s and 1930s with semi-detached housing and now anchored by Queen's Hospital nearby. Most householder projects here are extensions or lofts on those cohesive interwar semis, so the drawings have to sit comfortably within a consistent, planned streetscape.

There is no conservation area covering the Rush Green part of RM7 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of the interwar semi-detached layout and by the London Borough of Havering's householder design expectations, which lean on keeping the paired-house symmetry, original materials and roof forms intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions, side extensions and loft conversions runs steadily across roads like Sylvan Avenue, Kings Avenue and Whalebone Grove, where interwar semis sit on regular plots. Because the borough boundary runs through the suburb, we confirm which authority your property falls in and check its permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Rush Green RM7

Rush Green (RM7) — planning at a glance

Council: London Borough of Havering
Postcode district: RM7
Planning portal: View the Havering planning portal
Housing stock: Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular plots. Those consistent interwar semis, on regular plots with front and rear gardens, are what drive most of the rear-extension, side-extension and loft-conversion work across the area.
Article 4: No area-specific Article 4 direction is published for the Rush Green part of RM7; the London Borough of Havering's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Mill Lane · East Road · Crow Lane · Whalebone Grove · Hainault Road · Kings Avenue · Sylvan Avenue · Albany Road · Gordon Road · Millbrook Gardens · Whalebone Avenue · Burchett Way
Local constraints: A consistent interwar suburban grain of semi-detached houses on planned roads, so extension proposals are assessed against a steady street rhythm, building lines and paired-house symmetry rather than a one-off houseHavering's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further in the Rush Green part of RM7Matching original facing brick, render and roof tiles so a rear or side addition reads as part of the original interwar semi rather than an obvious bolt-onRegular but modest interwar plots and gardens, which constrain how deep a single-storey rear extension can go before it needs a full householder applicationSemi-detached forms where side and rear building lines are shared with a paired neighbour, making party-wall relationships, roof-line continuity and overshadowing relevant to what gets approvedThe Havering–Barking & Dagenham boundary running through the suburb along Rush Green Road, so it is worth confirming which authority a given property falls in before an application is prepared

Planning in Rush Green (RM7): what to know before you apply

Because Rush Green is a consistent interwar suburb of semi-detached houses, Havering assess extensions against the steady street rhythm and paired-house symmetry, so matching original brick, render and roof form and respecting the shared building line matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Rush Green part of RM7, so many houses retain permitted development rights for rear and loft work — but modest plots, shared party walls and the Havering–Barking & Dagenham boundary running through the suburb mean depth, height, neighbour impact and confirming the correct authority are the points a householder application is judged on.

Typical Rush Green housing stock

Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular plots. Those consistent interwar semis, on regular plots with front and rear gardens, are what drive most of the rear-extension, side-extension and loft-conversion work across the area.

Streets we regularly draw for in Rush Green

Mill Lane · East Road · Crow Lane · Whalebone Grove · Hainault Road · Kings Avenue · Sylvan Avenue · Albany Road · Gordon Road · Millbrook Gardens · Whalebone Avenue · Burchett Way

What RM7 is actually built of

Measured from 270 classified residential buildings in RM7, not from a description of the area.

Rush Green RM7 housing mix

Residential building form across the RM7 postcode district, from 270 classified buildings.

Attached on more than one side	41%
Attached on one side	54%
Detached	4%
Median building footprint	59 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.26
Buildings classified	270

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Rush Green (RM7) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Sheet from a side return extension drawings package drawn for a Rush Green property in RM7, showing the existing and proposed arrangement at scale — A sheet from the side return extension drawings package we submit to London Borough of Havering for Rush Green (RM7) properties.

Also in Rush Green RM7

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Havering Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Rush Green RM7 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission to extend a house in Rush Green?+

Not always. Many Rush Green semis retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the plots are fairly modest and the borough boundary runs through the suburb, we confirm which authority your property falls in and check its size limits and building lines against Havering's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Rush Green in a conservation area?+

No. There is no conservation area covering the Rush Green part of RM7. Its planning character is shaped instead by the uniform interwar semi-detached layout and Havering's householder design expectations, which favour keeping the paired-house symmetry, original materials and roof forms intact when you extend.

How much do planning and building-regulation drawings cost for a Rush Green extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Rush Green semi. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Havering Council take to decide?+

Havering determines most householder applications within the statutory eight-week period once validated; green-belt and conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Havering drawings to the council's checklist to keep the application on track.

Free Fixed Quote

Get your free Rush Green planning assessment

Tell us your Rush Green (RM7) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.