Rear Extension Drawings in Tower Hamlets
Fixed-fee, MCIAT-chartered rear extension drawings for Tower Hamlets homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.
Tower Hamlets runs from the listed Georgian terraces of Spitalfields and the warehouse and wharf conversions of Wapping and Limehouse through the Victorian streets of Bow and Mile End to the dense purpose-built and estate housing of Bethnal Green, Poplar and Whitechapel and the towers of the Isle of Dogs. It is one of London's most heritage-dense and design-scrutinised boroughs, so the right route for an alteration or extension depends heavily on the building type and its conservation or listing status.
A high proportion of streets fall within conservation areas — Fournier Street and Elder Street in Spitalfields, Wapping Pierhead, Narrow Street in Limehouse, Victoria Park, Tredegar Square in Bow and Whitechapel Market — where permitted development is removed and even some changes of use are controlled. Spitalfields in particular carries a high density of listed Georgian terraces, where listed-building consent is usually required for many alterations, internal as well as external. Tower Hamlets also applies Article 4 directions removing permitted development for HMO conversions in parts of the borough, Thames-side flood-zone considerations run along the Wapping and Limehouse riverside, and tall-building and townscape context near the City fringe and Canary Wharf adds further design scrutiny.
We prepare Tower Hamlets planning and, where needed, listed-building submissions to the council's validation and design standards, screening conservation-area and listing constraints for your exact address before recommending a route to consent. Because the borough determines most householder applications within the statutory eight-week period once validated, we work validation-first to avoid the queries that cause most delays. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce, usually at around 30% less.
Planning in Tower Hamlets: what to know before you apply
Tower Hamlets applies Article 4 directions to HMO conversions in parts of the borough and removes permitted development across its many conservation areas — Spitalfields, Wapping Pierhead and Tredegar Square among them. Spitalfields in particular carries a high density of listed Georgian terraces where listed-building consent is usually required. Thames flood-zone considerations apply along the riverside. We confirm the constraints for your address before drawing.
Typical Tower Hamlets housing stock
Georgian terraces around Spitalfields, warehouse and wharf conversions along the Wapping and Limehouse riverside, Victorian terraces across Bow and Mile End, and dense purpose-built and estate housing throughout the borough.
Areas we regularly draw for in Tower Hamlets
Bethnal Green · Bow · Poplar · Whitechapel · Wapping · Limehouse · Mile End · Isle of Dogs
What the numbers say about Tower Hamlets planning decisions
These are London Borough of Tower Hamlets’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Tower Hamlets
Larger householder extensions put to London Borough of Tower Hamlets under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 18 |
|---|---|
| Prior approval granted | 8 |
| Prior approval refused | 4 |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 269 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Tower Hamlets
Live entries on the national planning registers for London Borough of Tower Hamlets. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 64 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 63 |
| Conservation areasPermitted development is already narrower inside one | 61 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Rear Extension Drawings for Tower Hamlets homes: the package and the process
Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.
Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.
Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.
Do I need planning permission for a rear extension in London?
Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.
Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.
How deep can a single-storey rear extension go?
Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.
Permitted development
Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.
Larger home extension scheme
The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.
Designing the kitchen-diner: rooflights, bi-folds and daylight
Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.
- Structural opening sized for bi-fold or sliding doors across most of the rear elevation
- Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
- Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
- Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
| Route | When it applies | Typical fee |
|---|---|---|
| Permitted development (Lawful Development Certificate) | Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits | PD/LDC pack ~£950–£1,450 |
| Larger home extension (prior approval) | Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification | from £1,100 |
| Full householder planning permission | Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined planning and construction-ready pack with structural calculations for the opening and roof | Planning + Building Regs pack ~£2,200–£3,850 |
Rear Extension Drawings across Tower Hamlets
Rear Extension Drawings in Tower Hamlets — FAQs
How much does a rear extension cost to design in London?+
Do I need an architect for a rear extension?+
How long does it take to get rear extension drawings?+
What is the 45-degree rule?+
Will I need a Party Wall Agreement for a rear extension?+
Do I need planning permission for an extension in Tower Hamlets?+
My Tower Hamlets property is listed — what consent do I need?+
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
How long does Tower Hamlets Council take to decide?+
How much do planning drawings cost in Tower Hamlets?+
Get your free Tower Hamlets planning assessment
Tell us your Tower Hamlets address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.