Rear Extension Drawings in Camden
Fixed-fee, MCIAT-chartered rear extension drawings for Camden homeowners — London Borough of Camden validation and local constraints handled from the start.
Camden is one of London's most heritage-dense and design-scrutinised boroughs: much of its housing sits within conservation areas such as Hampstead, Belsize, Primrose Hill, Fitzroy Square, Bloomsbury and Dartmouth Park, or is listed outright, and the council applies detailed control to rear extensions, dormers, materials and — above all — basements. The stock ranges from Georgian and early-Victorian townhouses and stucco-fronted terraces to Hampstead's Arts-and-Crafts housing, mansion blocks and the Victorian terraces of Kentish Town and Gospel Oak. In Hampstead, Belsize Park and Primrose Hill especially, applications reward drawings that respond precisely to the local townscape rather than a standard template.
Because near-borough-wide conservation coverage sits alongside a high density of listed buildings in Hampstead, Bloomsbury and Fitzrovia, permitted development cannot be assumed for roof alterations, front elevations or many rear works — a full householder application, and often listed-building consent, is usually needed. Camden also operates one of the most rigorous basement policies in London: any basement or lower-ground extension generally requires a Basement Impact Assessment addressing structural stability, drainage and groundwater. We take a validation-first approach, screening the conservation-area, listing and basement position for your exact address before a line is drawn, and coordinating the Basement Impact Assessment where a below-ground scheme is involved.
We prepare Camden planning and listed-building submissions to the council's validation and design standards across Camden Town, Kentish Town, West Hampstead and the wider borough, producing the same council-accepted drawings an architect would — usually at around 30% less. The fee is agreed up front and fixed, drawings typically turn around in about seven days, and we redraw free until Camden approves. Most householder applications are determined within the statutory eight-week period once validated, though basement, conservation and listed-building cases can attract additional consultation, so a complete, correctly scaled submission is the best defence against delay.
Planning in Camden: what to know before you apply
Camden operates one of the most rigorous basement policies in London: schemes involving a basement or lower-ground extension generally require a Basement Impact Assessment addressing structural stability, drainage and groundwater. Add near-borough-wide conservation coverage and a high proportion of listed buildings, and permitted development cannot be assumed — we confirm the exact constraints before drawing.
Typical Camden housing stock
Georgian and early-Victorian townhouses, Hampstead's historic and Arts-and-Crafts housing, stucco-fronted terraces and mansion blocks, and Victorian terraces across Kentish Town and Gospel Oak.
Areas we regularly draw for in Camden
Hampstead · Camden Town · Kentish Town · Belsize Park · Primrose Hill · Bloomsbury · Gospel Oak · West Hampstead
What the numbers say about Camden planning decisions
These are London Borough of Camden’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Camden
Larger householder extensions put to London Borough of Camden under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 1 |
|---|---|
| Prior approval granted | 6 |
| Prior approval refused | 1 |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 247 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Camden
Live entries on the national planning registers for London Borough of Camden. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 21 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 21 |
| Conservation areasPermitted development is already narrower inside one | 40 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Rear Extension Drawings for Camden homes: the package and the process
Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.
Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.
Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.
Do I need planning permission for a rear extension in London?
Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.
Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.
How deep can a single-storey rear extension go?
Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.
Permitted development
Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.
Larger home extension scheme
The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.
Designing the kitchen-diner: rooflights, bi-folds and daylight
Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.
- Structural opening sized for bi-fold or sliding doors across most of the rear elevation
- Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
- Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
- Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
| Route | When it applies | Typical fee |
|---|---|---|
| Permitted development (Lawful Development Certificate) | Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits | PD/LDC pack ~£950–£1,450 |
| Larger home extension (prior approval) | Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification | from £1,100 |
| Full householder planning permission | Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined planning and construction-ready pack with structural calculations for the opening and roof | Planning + Building Regs pack ~£2,200–£3,850 |
Rear Extension Drawings across Camden
Rear Extension Drawings in Camden — FAQs
How much does a rear extension cost to design in London?+
Do I need an architect for a rear extension?+
How long does it take to get rear extension drawings?+
What is the 45-degree rule?+
Will I need a Party Wall Agreement for a rear extension?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Camden planning assessment
Tell us your Camden address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.