Single-storey rear extension onto a garden behind a Balham SW12 Victorian terrace in Wandsworth

Balham · SW12 · Wandsworth

Rear Extension Drawings in Balham SW12

Fixed-fee, MCIAT-chartered rear extension drawings for Balham (SW12) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Balham (SW12) is one of Wandsworth's most consistent Victorian and Edwardian terraced neighbourhoods, and side-return and rear extensions are by far the most requested projects here. Because so many houses share the same footprint, Wandsworth's design expectations for the area are well established — meeting them first time is straightforward when the drawings are prepared to the borough's residential extension guidance.

The Heaver Estate around Nightingale Lane is a conservation area, so roofline changes, dormers and front-elevation work there face tighter control than on the surrounding streets. We check where a Balham property sits relative to that boundary before recommending a permitted-development or full-application route.

Proposed floor plan

Balham SW12

Balham (SW12) — planning at a glance

Council: London Borough of Wandsworth
Postcode district: SW12
Planning portal: View the Wandsworth planning portal
Housing stock: Long runs of late-Victorian and Edwardian terraces on the streets between Balham High Road and Wandsworth Common, plus the red-brick Heaver Estate and a scattering of Edwardian mansion flats.
Article 4: London Borough of Wandsworth does not publish its Article 4 directions to the national planning register, so permitted development rights in Balham (SW12) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Conservation-area control is the main constraint.
Conservation: Heaver Estate
Sample streets: Balham High Road · Bedford Hill · Ritherdon Road · Nightingale Lane
Local constraints: Heaver Estate conservation-area control over rooflines, materials and front elevationsConsistent terraced house type where side-return and rear depth expectations are well establishedMature street trees on several roads carrying Tree Preservation Orders

Planning in Balham (SW12): what to know before you apply

SW12 has no borough-wide Article 4 direction affecting typical householder work, so many Balham houses retain permitted development rights for rear and loft projects — but the Heaver Estate conservation area is the exception, and terraced side-returns are common enough that Wandsworth has clear, well-documented expectations for them.

Typical Balham housing stock

Long runs of late-Victorian and Edwardian terraces on the streets between Balham High Road and Wandsworth Common, plus the red-brick Heaver Estate and a scattering of Edwardian mansion flats.

Streets we regularly draw for in Balham

Balham High Road · Bedford Hill · Ritherdon Road · Nightingale Lane

What SW12 is actually built of

Measured from 421 classified residential buildings in SW12, not from a description of the area.

Balham SW12 housing mix

Residential building form across the SW12 postcode district, from 421 classified buildings.

Attached on more than one side	65%
Attached on one side	31%
Detached	4%
Median building footprint	77 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.85
Buildings classified	421

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Balham (SW12) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Balham property in SW12, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to London Borough of Wandsworth for Balham (SW12) properties.

Also in Balham SW12

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Wandsworth Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Balham SW12 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission for a side-return extension in Wandsworth?+

On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.

What does Wandsworth's basement Article 4 direction mean for me?+

In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.

How long will Wandsworth take to decide my application?+

Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.

Can you design an extension for a converted flat near the commons?+

Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.

How much do Wandsworth planning drawings cost?+

We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.

Free Fixed Quote

Get your free Balham planning assessment

Tell us your Balham (SW12) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.