MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportMansard Loft Conversion Drawings in Kentish Town NW5

Commercial to residential conversion drawings in Kentish Town NW5, London Borough of Camden
Kentish Town · NW5 · Camden

Mansard Loft Conversion Drawings in Kentish Town NW5

Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Kentish Town (NW5) homeowners — London Borough of Camden validation and local constraints handled from the start.

Free Kentish Town planning assessment

Tell us your Kentish Town (NW5) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Kentish Town (NW5) is predominantly Victorian, with two conservation areas — Dartmouth Park on the rising ground to the north and Inkerman in the streets off Kentish Town Road — and Camden's Article 4 layer over the top. It is a district where the difference between one street and the next genuinely changes the route to consent.

Camden's Basements direction removes permitted development rights for basement works throughout, so lower-ground schemes need a full application. The Class E to C3 direction, in its outside-the-CAZ form, removes the permitted commercial-to-residential change here — which matters along Kentish Town Road and Fortess Road, where the shop-to-flat conversion is a common project and now needs planning rather than prior approval. In the Dartmouth Park and Inkerman conservation areas, frontages and rooflines are controlled, and the rise toward Dartmouth Park Hill means rear extension levels and overlooking are assessed against the slope. We check the boundaries and the Article 4 position for an NW5 address before drawing to Camden's guidance.

Commercial to residential conversion drawings in Kentish Town NW5, London Borough of Camden
Isometric illustration of a Kentish Town NW5 home mansard loft conversion drawings design
Proposed floor plan
Kentish Town NW5

Planning in Kentish Town (NW5): what to know before you apply

NW5 falls under Camden's Basements Article 4 direction, removing permitted development rights for basement works, and the outside-CAZ Class E to C3 direction, which removes the permitted commercial-to-residential change — so shop-to-flat conversions along Kentish Town Road and Fortess Road need full planning applications rather than prior approval. The Dartmouth Park and Inkerman conservation areas control frontages and rooflines, and the rising ground toward Dartmouth Park Hill brings level and overlooking assessments into rear extension design.

Typical Kentish Town housing stock

Victorian terraces through the centre and along Fortess Road, larger Victorian semi-detached and terraced houses climbing Dartmouth Park Hill, and a substantial share of the stock converted to flats.

Streets we regularly draw for in Kentish Town

Kentish Town Road · Fortess Road · Dartmouth Park Hill · Lady Margaret Road

What NW5 is actually built of

Measured from 371 classified residential buildings in NW5, not from a description of the area.

Kentish Town NW5 housing mix

Residential building form across the NW5 postcode district, from 371 classified buildings.

Attached on more than one side68%
Attached on one side27%
Detached5%
Median building footprint66 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.43
Buildings classified371

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Mansard Loft Conversion Drawings for Kentish Town (NW5) homes: the package and the process

A mansard is a rebuild of the roof, so the drawings carry more structure than a dormer scheme: the new front and rear slopes with their pitch angles set out, the upstand and party wall junctions, the parapet and gutter detail, and a street-scene elevation showing the new roof against its neighbours.

That street scene usually decides the application. Where a terrace already has approved mansards, the drawing shows the new roof matching their line, pitch and window rhythm; where it would be the first, the case is made on the roof form itself. Either way the argument is drawn, not written.

Mansards belong to terraces and to parapeted stock. The form works because a near-vertical rear wall can rise off the party walls and sit behind a parapet, which is why it is the usual answer in tightly controlled streets and rarely the right answer on a detached house.

What is a mansard loft conversion?

A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.

Does a mansard loft conversion need planning permission in London?

Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.

Why do conservation areas favour mansards?

Many London conservation areas already contain mansard roofs as part of the original streetscape — grand Georgian and Victorian terraces were frequently built with a mansard attic storey behind a parapet, so a matching modern mansard often reads as a restoration of the intended roofline rather than an alteration. Getting that read right depends on matching the existing slate or tile colour, the proportion and spacing of the dormer windows, and the eaves and parapet detailing of the host terrace — details we design in from the first drawing rather than treating as an afterthought.

  • Slate or tile colour and coursing matched to the existing roof and neighbouring properties
  • Dormer window proportions and spacing aligned to the terrace's existing rhythm
  • Eaves, parapet and party wall junctions detailed to sit flush with neighbouring roofs
Typical mansard loft conversion drawing packages
PackageScopePlanning routeFee from
Rear mansard, planning onlyDesign, planning drawings and supporting statementHouseholder planning£1,600
Rear mansard, planning and building regsPlanning drawings plus structural and Part L detailingHouseholder planning£2,200
Front and rear mansardFull roof rebuild on both slopes, with structuralHouseholder planning£2,400
Sheet from a mansard loft conversion drawings package drawn for a Kentish Town property in NW5, showing the existing and proposed arrangement at scale
A sheet from the mansard loft conversion drawings package we submit to London Borough of Camden for Kentish Town (NW5) properties.
FAQ

Mansard Loft Conversion Drawings in Kentish Town NW5 — FAQs

How much do mansard loft conversion drawings cost in London?+
Planning drawings for a rear mansard typically start around £1,600. A combined planning and building regulations package, or a front-and-rear mansard, usually runs to around £2,200–£2,400 once structural calculations are included.
Can a mansard ever be permitted development?+
Rarely — because it changes the shape of the roof rather than adding within it, a mansard almost always exceeds permitted development tolerances. If you want to avoid a full application, ask us whether a dormer or hip-to-gable conversion would meet your space needs instead.
How long do mansard drawings take?+
A full planning drawing set is typically ready within about 10–14 days of survey, reflecting the extra design and consultation work a full roof rebuild involves. The statutory 8-week householder determination period then runs from validation.
Will a mansard need scaffolding and affect the whole roof?+
Yes — because the existing rear roof slope is removed and rebuilt, a mansard is a larger construction project than a dormer, and we design the sequencing and structural tie-ins with that in mind so your builder can programme the work efficiently.
Do you handle the party wall process as well as the drawings?+
We identify which neighbours require notice under the Party Wall etc. Act 1996 and provide the drawings needed to support the notice, so the party wall and planning processes can run in parallel rather than one waiting on the other.
Do I need planning permission for a rear extension in Camden?+
Frequently, yes. Much of Camden sits within a conservation area or is listed, and near-borough-wide conservation coverage removes permitted development for many external works. On unlisted homes outside a conservation area a rear extension may still qualify, but in Hampstead, Belsize Park and Primrose Hill a full application is usually needed. We confirm the exact constraints for your address before drawing.
What is a Basement Impact Assessment and will I need one in Camden?+
Camden operates one of the most rigorous basement policies in London. Schemes involving a basement or lower-ground extension generally require a Basement Impact Assessment addressing structural stability, drainage and groundwater. If you are considering below-ground space we flag the requirement early and coordinate the assessment so the application is complete when it is submitted.
Can I make changes to a listed building in Camden?+
Often, but listed-building consent is usually required alongside — or instead of — planning permission, and internal as well as external changes can be controlled. Camden has a high density of listed buildings in Hampstead, Bloomsbury and Fitzrovia. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
How long does Camden take to decide an application?+
Camden determines most householder applications within the statutory eight-week period once validated; basement, conservation and listed-building cases can involve additional consultation. We prepare Camden submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Camden?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Camden approves. A conservation-area rear extension, a basement and a listed-building scheme differ in the evidence required, so we quote once we have seen your project rather than by the hour.
Free Fixed Quote

Get your free Kentish Town planning assessment

Tell us your Kentish Town (NW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.