MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHMO Conversion Drawings in Bloomsbury WC1E

Georgian terrace by a garden square in Bloomsbury WC1E within Camden Council conservation area near the British Museum
Bloomsbury · WC1E · Camden

HMO Conversion Drawings in Bloomsbury WC1E

Fixed-fee, MCIAT-chartered hmo conversion drawings for Bloomsbury (WC1E) homeowners — London Borough of Camden validation and local constraints handled from the start.

Free Bloomsbury planning assessment

Tell us your Bloomsbury (WC1E) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Bloomsbury in WC1E is the Georgian garden-square heart of Camden's university and British Museum quarter, one of the capital's most protected historic townscapes. Projects here centre on internal reconfiguration, sensitive refurbishment, roof and rear works and change of use, almost always requiring full planning and, on the many listed buildings, listed-building consent.

Because so much of the fabric is both listed and within the Bloomsbury, Fitzroy Square and Charlotte Street conservation areas, we prepare measured drawings and heritage statements that respect the original brickwork, fenestration and square setting, working to the standard Camden Council and its conservation officers demand.

Georgian terrace by a garden square in Bloomsbury WC1E within Camden Council conservation area near the British Museum
Isometric illustration of a Bloomsbury WC1E home hmo conversion drawings design
Proposed floor plan
Bloomsbury WC1E

Planning in Bloomsbury (WC1E): what to know before you apply

There is no published householder Article 4 direction, but conservation-area status combined with widespread statutory listing means most external and internal alterations need consent; the garden-square townscape governs what is acceptable.

Typical Bloomsbury housing stock

Formal Georgian terraces of brown and yellow stock brick frame the celebrated garden squares, many now in institutional, university or office use with residential upper floors. A high proportion of buildings are statutorily listed as well as sitting within the conservation area.

Streets we regularly draw for in Bloomsbury

Bedford Square · Montague Street · Store Street · Great Russell Street

What the wider borough is built of

WC1E has too few classified residential buildings to publish a district figure of its own, so we do not estimate one. The measured figures below are borough-wide and WC1E is not among the districts they cover.

Borough-wide building mix

Residential building form across 5 of the borough's 6 postcode districts, from 1,296 classified buildings. WC1E is below the publication floor and is excluded from these totals, so they describe the borough around it rather than the district itself.

Attached on more than one side59%
Attached on one side31%
Detached11%
Buildings attached on more than one side761
Detached buildings137
Buildings classified1,296
Postcode districts measured5

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

HMO Conversion Drawings for Bloomsbury (WC1E) homes: the package and the process

An HMO scheme is drawn against a schedule. Every bedroom is dimensioned with its usable floor area stated, shared kitchen and bathroom provision is counted against the number of occupants, and the layout has to hold up against the space standards the licensing team applies.

The fire strategy is drawn, not described: protected escape route, fire doors and their ratings, alarm coverage by room, and compartmentation between floors. Licensing and building control assess the same drawing set from different angles, so it has to satisfy both without contradiction.

Room count is a function of the existing plan. A large semi or detached house with generous rooms can meet the space standards without subdivision, while a narrow terrace usually cannot reach the same occupancy without creating rooms that fall below the minimum floor area.

C4 small HMO or sui generis large HMO — which applies to your property?

The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.

Do I need planning permission for an HMO conversion in London?

Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.

Mandatory and additional HMO licensing — what's required?

Most HMOs need a licence from the council, separate from any planning permission. A licence application typically has to demonstrate that the property meets fire safety, amenity and space standards, that gas and electrical installations are safety-certified, and that the landlord or managing agent is a fit and proper person to hold it.

Mandatory licensing

Applies to any HMO of five or more occupants forming two or more households, regardless of the number of storeys — a national requirement in every London borough.

Additional licensing

Many boroughs extend licensing to smaller HMOs, typically three or four occupants, across all or part of their area. We check the current scheme for your borough before you apply, since schemes and boundaries change.

HMO routes and standards in London
FactorC4 small HMO (3–6 sharers)Sui generis large HMO (7+)
Use classC4Sui generis
Planning permissionOften needed due to Article 4 directions in most boroughsAlways needed
LicensingMandatory if 5+ occupants; additional licensing in many boroughsMandatory
Typical drawing packageFrom £1,400Full planning + building regs, from £2,200
Sheet from a hmo conversion drawings package drawn for a Bloomsbury property in WC1E, showing the existing and proposed arrangement at scale
A sheet from the hmo conversion drawings package we submit to London Borough of Camden for Bloomsbury (WC1E) properties.
FAQ

HMO Conversion Drawings in Bloomsbury WC1E — FAQs

How much do HMO conversion drawings cost in London?+
HMO conversion packages typically start from £1,400, rising where full planning permission, structural work or a larger occupancy is involved. We agree a fixed fee upfront, before drawing begins.
Is HMO conversion permitted development in London?+
Only sometimes. Converting a home into a small HMO (C4) can be permitted development nationally, but many London boroughs have removed that right with an Article 4 direction, and any large HMO (seven or more occupants) always needs planning permission. We check your address before recommending a route.
Do I need a licence as well as planning permission?+
Usually yes. Licensing and planning permission are separate processes assessed by different council teams — most HMOs need a mandatory or additional licence regardless of whether planning permission was also required for the conversion.
Do I need an architect for an HMO conversion?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings an architect would, coordinated with structural and fire safety detail, typically at a lower fee.
How long do HMO conversion drawings take?+
Drawings are typically ready around 7 days from survey. Where full planning permission is needed, the council then has a statutory eight-week period to determine the application.
Do I need planning permission for a rear extension in Camden?+
Frequently, yes. Much of Camden sits within a conservation area or is listed, and near-borough-wide conservation coverage removes permitted development for many external works. On unlisted homes outside a conservation area a rear extension may still qualify, but in Hampstead, Belsize Park and Primrose Hill a full application is usually needed. We confirm the exact constraints for your address before drawing.
What is a Basement Impact Assessment and will I need one in Camden?+
Camden operates one of the most rigorous basement policies in London. Schemes involving a basement or lower-ground extension generally require a Basement Impact Assessment addressing structural stability, drainage and groundwater. If you are considering below-ground space we flag the requirement early and coordinate the assessment so the application is complete when it is submitted.
Can I make changes to a listed building in Camden?+
Often, but listed-building consent is usually required alongside — or instead of — planning permission, and internal as well as external changes can be controlled. Camden has a high density of listed buildings in Hampstead, Bloomsbury and Fitzrovia. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
How long does Camden take to decide an application?+
Camden determines most householder applications within the statutory eight-week period once validated; basement, conservation and listed-building cases can involve additional consultation. We prepare Camden submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Camden?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Camden approves. A conservation-area rear extension, a basement and a listed-building scheme differ in the evidence required, so we quote once we have seen your project rather than by the hour.
Free Fixed Quote

Get your free Bloomsbury planning assessment

Tell us your Bloomsbury (WC1E) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.