HMO Conversion Drawings in Bermondsey SE1
Fixed-fee, MCIAT-chartered hmo conversion drawings for Bermondsey (SE1) homeowners — London Borough of Southwark validation and local constraints handled from the start.
Bermondsey (SE1) is a dense pocket of Southwark where Georgian townhouses, former tanneries and warehouse conversions sit on a surviving medieval street grid — so homeowner work here leans toward loft conversions, roof terraces and shallow rear or side-return extensions that respect the narrow historic plots.
Most of the residential fabric lies within the Bermondsey Street or Tower Bridge Conservation Areas, where roof, front and rear alterations are judged against the historic townscape. We confirm which conservation-area boundary applies before advising whether your scheme is permitted development or needs a full householder application.
Planning in Bermondsey (SE1): what to know before you apply
Homes across this part of SE1 typically sit within the Bermondsey Street or Tower Bridge Conservation Areas, which curtail permitted-development rights and mean many roof and side changes need a householder application. Southwark's Article 4 directions here concern use changes rather than extensions, so the conservation-area appraisal is the main early check.
Typical Bermondsey housing stock
Georgian and early-Victorian townhouses and shop-houses line Bermondsey Street on a medieval plot pattern, interleaved with converted tanneries and warehouses. Narrow frontages, arched alleyways to rear yards and shallow back plots define what can be added.
Streets we regularly draw for in Bermondsey
Bermondsey Street · Tanner Street · Morocco Street · Leathermarket Street
What SE1 is actually built of
Measured from 205 classified residential buildings in SE1, not from a description of the area.
Bermondsey SE1 housing mix
Residential building form across the SE1 postcode district, from 205 classified buildings.
| Attached on more than one side | 72% |
|---|---|
| Attached on one side | 23% |
| Detached | 6% |
| Median building footprint | 55 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 5.67 |
| Buildings classified | 205 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
HMO Conversion Drawings for Bermondsey (SE1) homes: the package and the process
An HMO scheme is drawn against a schedule. Every bedroom is dimensioned with its usable floor area stated, shared kitchen and bathroom provision is counted against the number of occupants, and the layout has to hold up against the space standards the licensing team applies.
The fire strategy is drawn, not described: protected escape route, fire doors and their ratings, alarm coverage by room, and compartmentation between floors. Licensing and building control assess the same drawing set from different angles, so it has to satisfy both without contradiction.
Room count is a function of the existing plan. A large semi or detached house with generous rooms can meet the space standards without subdivision, while a narrow terrace usually cannot reach the same occupancy without creating rooms that fall below the minimum floor area.
C4 small HMO or sui generis large HMO — which applies to your property?
The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.
Do I need planning permission for an HMO conversion in London?
Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.
Mandatory and additional HMO licensing — what's required?
Most HMOs need a licence from the council, separate from any planning permission. A licence application typically has to demonstrate that the property meets fire safety, amenity and space standards, that gas and electrical installations are safety-certified, and that the landlord or managing agent is a fit and proper person to hold it.
Mandatory licensing
Applies to any HMO of five or more occupants forming two or more households, regardless of the number of storeys — a national requirement in every London borough.
Additional licensing
Many boroughs extend licensing to smaller HMOs, typically three or four occupants, across all or part of their area. We check the current scheme for your borough before you apply, since schemes and boundaries change.
| Factor | C4 small HMO (3–6 sharers) | Sui generis large HMO (7+) |
|---|---|---|
| Use class | C4 | Sui generis |
| Planning permission | Often needed due to Article 4 directions in most boroughs | Always needed |
| Licensing | Mandatory if 5+ occupants; additional licensing in many boroughs | Mandatory |
| Typical drawing package | From £1,400 | Full planning + building regs, from £2,200 |
HMO Conversion Drawings in Bermondsey SE1 — FAQs
How much do HMO conversion drawings cost in London?+
Is HMO conversion permitted development in London?+
Do I need a licence as well as planning permission?+
Do I need an architect for an HMO conversion?+
How long do HMO conversion drawings take?+
Do I need planning permission for an extension in Southwark?+
What is the Dulwich Estate scheme of management?+
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
How long does Southwark Council take to decide?+
How much do planning drawings cost in Southwark?+
Get your free Bermondsey planning assessment
Tell us your Bermondsey (SE1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.