MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHMO Conversion Drawings in Barnes SW13

Open-plan kitchen extension in a Barnes SW13 Victorian village house near the Thames, London Borough of Richmond
Barnes · SW13 · Richmond

HMO Conversion Drawings in Barnes SW13

Fixed-fee, MCIAT-chartered hmo conversion drawings for Barnes (SW13) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Barnes planning assessment

Tell us your Barnes (SW13) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Barnes (SW13) is an unusually intact riverside village in Richmond, and it is heavily conservation-controlled: four conservation areas — Barnes Common, Barnes Green, Castelnau and Madrid Road — cover most of the housing. Whether a property sits inside one of those boundaries, and often it does, is the single biggest factor in how an extension, loft or elevation change is designed and assessed.

The Thames wraps the neighbourhood on two sides, so riverside houses along Lonsdale Road and the Terrace also carry flood-zone considerations, and Barnes Common is protected metropolitan open land. We map a Barnes property against the conservation, flood-zone and open-land boundaries first, then design the drawings to Richmond's residential and conservation guidance so the application is validated without a query.

Open-plan kitchen extension in a Barnes SW13 Victorian village house near the Thames, London Borough of Richmond
Isometric illustration of a Barnes SW13 home hmo conversion drawings design
Proposed floor plan
Barnes SW13

Planning in Barnes (SW13): what to know before you apply

SW13 has no householder Article 4 direction, but its four conservation areas mean permitted development cannot be assumed across most of Barnes, and riverside properties along Lonsdale Road sit within the Thames flood zone — both are checked before we recommend a route.

Typical Barnes housing stock

Victorian and Edwardian terraces and cottages around Barnes Green and the village, the grand Italianate semi-detached villas along Castelnau toward Hammersmith Bridge, and riverside houses fronting the Thames on Lonsdale Road.

Streets we regularly draw for in Barnes

Church Road · Castelnau · White Hart Lane · Lonsdale Road

What SW13 is actually built of

Measured from 328 classified residential buildings in SW13, not from a description of the area.

Barnes SW13 housing mix

Residential building form across the SW13 postcode district, from 328 classified buildings.

Attached on more than one side48%
Attached on one side47%
Detached5%
Median building footprint75 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.29
Buildings classified328

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

HMO Conversion Drawings for Barnes (SW13) homes: the package and the process

An HMO scheme is drawn against a schedule. Every bedroom is dimensioned with its usable floor area stated, shared kitchen and bathroom provision is counted against the number of occupants, and the layout has to hold up against the space standards the licensing team applies.

The fire strategy is drawn, not described: protected escape route, fire doors and their ratings, alarm coverage by room, and compartmentation between floors. Licensing and building control assess the same drawing set from different angles, so it has to satisfy both without contradiction.

Room count is a function of the existing plan. A large semi or detached house with generous rooms can meet the space standards without subdivision, while a narrow terrace usually cannot reach the same occupancy without creating rooms that fall below the minimum floor area.

C4 small HMO or sui generis large HMO — which applies to your property?

The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.

Do I need planning permission for an HMO conversion in London?

Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.

Mandatory and additional HMO licensing — what's required?

Most HMOs need a licence from the council, separate from any planning permission. A licence application typically has to demonstrate that the property meets fire safety, amenity and space standards, that gas and electrical installations are safety-certified, and that the landlord or managing agent is a fit and proper person to hold it.

Mandatory licensing

Applies to any HMO of five or more occupants forming two or more households, regardless of the number of storeys — a national requirement in every London borough.

Additional licensing

Many boroughs extend licensing to smaller HMOs, typically three or four occupants, across all or part of their area. We check the current scheme for your borough before you apply, since schemes and boundaries change.

HMO routes and standards in London
FactorC4 small HMO (3–6 sharers)Sui generis large HMO (7+)
Use classC4Sui generis
Planning permissionOften needed due to Article 4 directions in most boroughsAlways needed
LicensingMandatory if 5+ occupants; additional licensing in many boroughsMandatory
Typical drawing packageFrom £1,400Full planning + building regs, from £2,200
Sheet from a hmo conversion drawings package drawn for a Barnes property in SW13, showing the existing and proposed arrangement at scale
A sheet from the hmo conversion drawings package we submit to London Borough of Richmond upon Thames for Barnes (SW13) properties.
FAQ

HMO Conversion Drawings in Barnes SW13 — FAQs

How much do HMO conversion drawings cost in London?+
HMO conversion packages typically start from £1,400, rising where full planning permission, structural work or a larger occupancy is involved. We agree a fixed fee upfront, before drawing begins.
Is HMO conversion permitted development in London?+
Only sometimes. Converting a home into a small HMO (C4) can be permitted development nationally, but many London boroughs have removed that right with an Article 4 direction, and any large HMO (seven or more occupants) always needs planning permission. We check your address before recommending a route.
Do I need a licence as well as planning permission?+
Usually yes. Licensing and planning permission are separate processes assessed by different council teams — most HMOs need a mandatory or additional licence regardless of whether planning permission was also required for the conversion.
Do I need an architect for an HMO conversion?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings an architect would, coordinated with structural and fire safety detail, typically at a lower fee.
How long do HMO conversion drawings take?+
Drawings are typically ready around 7 days from survey. Where full planning permission is needed, the council then has a statutory eight-week period to determine the application.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Barnes planning assessment

Tell us your Barnes (SW13) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.