MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHMO Conversion Drawings in Bankside SE1

Riverside warehouse-to-flats conversion in Bankside SE1 near Tate Modern, within Southwark Council's townscape control
Bankside · SE1 · Southwark

HMO Conversion Drawings in Bankside SE1

Fixed-fee, MCIAT-chartered hmo conversion drawings for Bankside (SE1) homeowners — London Borough of Southwark validation and local constraints handled from the start.

Free Bankside planning assessment

Tell us your Bankside (SE1) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Bankside (SE1) is a riverside neighbourhood dominated by converted warehouses, wharf buildings and modern apartment blocks around Tate Modern and the historic Borough, rather than the family houses typical elsewhere in Southwark. Most projects here are internal reconfigurations, roof terraces, mansard additions and change-of-use applications on flats, and Southwark's townscape expectations for this sensitive riverside setting are exacting.

Conservation control around Borough High Street, Trinity Church Square and the Bankside waterfront, combined with protected river views near Tate Modern, means alterations to facades, rooflines and terraces face tight scrutiny. We establish where a Bankside property sits against those boundaries and view corridors before drawing, and prepare the application to Southwark's validation and townscape standards.

Riverside warehouse-to-flats conversion in Bankside SE1 near Tate Modern, within Southwark Council's townscape control
Isometric illustration of a Bankside SE1 home hmo conversion drawings design
Proposed floor plan
Bankside SE1

Planning in Bankside (SE1): what to know before you apply

SE1 has no published householder Article 4 direction affecting typical residential work in Bankside, but the neighbourhood's riverside townscape control, its Borough conservation areas and its predominance of flats and warehouse conversions mean roof-terrace, mansard and change-of-use proposals are the ones most closely assessed.

Typical Bankside housing stock

Converted riverside warehouses and wharf buildings turned into flats, alongside a large stock of newer apartment blocks around Tate Modern and the Borough, with pockets of surviving Georgian and Victorian terraces near Trinity Church Square.

Streets we regularly draw for in Bankside

Hatfields · Union Street · Bear Gardens · Borough High Street

What SE1 is actually built of

Measured from 205 classified residential buildings in SE1, not from a description of the area.

Bankside SE1 housing mix

Residential building form across the SE1 postcode district, from 205 classified buildings.

Attached on more than one side72%
Attached on one side23%
Detached6%
Median building footprint55 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate5.67
Buildings classified205

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

HMO Conversion Drawings for Bankside (SE1) homes: the package and the process

An HMO scheme is drawn against a schedule. Every bedroom is dimensioned with its usable floor area stated, shared kitchen and bathroom provision is counted against the number of occupants, and the layout has to hold up against the space standards the licensing team applies.

The fire strategy is drawn, not described: protected escape route, fire doors and their ratings, alarm coverage by room, and compartmentation between floors. Licensing and building control assess the same drawing set from different angles, so it has to satisfy both without contradiction.

Room count is a function of the existing plan. A large semi or detached house with generous rooms can meet the space standards without subdivision, while a narrow terrace usually cannot reach the same occupancy without creating rooms that fall below the minimum floor area.

C4 small HMO or sui generis large HMO — which applies to your property?

The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.

Do I need planning permission for an HMO conversion in London?

Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.

Mandatory and additional HMO licensing — what's required?

Most HMOs need a licence from the council, separate from any planning permission. A licence application typically has to demonstrate that the property meets fire safety, amenity and space standards, that gas and electrical installations are safety-certified, and that the landlord or managing agent is a fit and proper person to hold it.

Mandatory licensing

Applies to any HMO of five or more occupants forming two or more households, regardless of the number of storeys — a national requirement in every London borough.

Additional licensing

Many boroughs extend licensing to smaller HMOs, typically three or four occupants, across all or part of their area. We check the current scheme for your borough before you apply, since schemes and boundaries change.

HMO routes and standards in London
FactorC4 small HMO (3–6 sharers)Sui generis large HMO (7+)
Use classC4Sui generis
Planning permissionOften needed due to Article 4 directions in most boroughsAlways needed
LicensingMandatory if 5+ occupants; additional licensing in many boroughsMandatory
Typical drawing packageFrom £1,400Full planning + building regs, from £2,200
Sheet from a hmo conversion drawings package drawn for a Bankside property in SE1, showing the existing and proposed arrangement at scale
A sheet from the hmo conversion drawings package we submit to London Borough of Southwark for Bankside (SE1) properties.
FAQ

HMO Conversion Drawings in Bankside SE1 — FAQs

How much do HMO conversion drawings cost in London?+
HMO conversion packages typically start from £1,400, rising where full planning permission, structural work or a larger occupancy is involved. We agree a fixed fee upfront, before drawing begins.
Is HMO conversion permitted development in London?+
Only sometimes. Converting a home into a small HMO (C4) can be permitted development nationally, but many London boroughs have removed that right with an Article 4 direction, and any large HMO (seven or more occupants) always needs planning permission. We check your address before recommending a route.
Do I need a licence as well as planning permission?+
Usually yes. Licensing and planning permission are separate processes assessed by different council teams — most HMOs need a mandatory or additional licence regardless of whether planning permission was also required for the conversion.
Do I need an architect for an HMO conversion?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings an architect would, coordinated with structural and fire safety detail, typically at a lower fee.
How long do HMO conversion drawings take?+
Drawings are typically ready around 7 days from survey. Where full planning permission is needed, the council then has a statutory eight-week period to determine the application.
Do I need planning permission for an extension in Southwark?+
It depends on the area. On Victorian terraces in Camberwell and Peckham a single-storey rear or side-return extension can fall within permitted development, but conservation areas across Camberwell, Dulwich, Bermondsey and Bankside remove or restrict those rights. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What is the Dulwich Estate scheme of management?+
It is a distinctive Southwark consideration: many properties on the Dulwich Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. It is separate from the council's decision, so both must be satisfied. We flag whether the Estate scheme applies to your property before drawing and design to its requirements as well as the council's.
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
Yes. Southwark's riverside quarters carry their own townscape and taller-building context, and conversions there are assessed against conservation and design control near the Thames. We prepare drawings that respond to that setting and the council's design expectations, confirming the constraints for your specific building before design begins.
How long does Southwark Council take to decide?+
Southwark determines most householder applications within the statutory eight-week period once validated; Dulwich, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Southwark?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Southwark approves. A Camberwell terrace extension and a Dulwich Estate application differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Bankside planning assessment

Tell us your Bankside (SE1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.