Hip-to-Gable Loft Conversion Drawings in Notting Hill W11
Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Notting Hill (W11) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
Notting Hill (W11) in Kensington and Chelsea is built around its communal garden squares. The Norland and Avondale conservation areas protect that layout — mid-Victorian stucco terraces arranged so their rear elevations face a shared garden rather than individual private ones. That single fact changes the arithmetic of a rear extension here: the elevation you are altering is seen from a protected communal space, and it is assessed accordingly.
Kensington and Chelsea's Article 4 directions do the rest. Basement work has had its permitted development rights removed, so the deep lower-ground schemes W11 is known for need a full planning application from the outset. A second direction covers minor alterations in conservation areas including works to windows, so replacing windows on a stucco frontage needs permission in its own right. A third removes permitted development rights for commercial to residential conversion. Many W11 addresses are also flats within subdivided houses, which carry no permitted development rights regardless. We establish the garden-square context, the tenure and which directions apply before drawing to the borough's guidance.
Planning in Notting Hill (W11): what to know before you apply
W11 sits within the Norland and Avondale conservation areas, which protect a layout of mid-Victorian stucco terraces built around communal garden squares — so rear elevations face a shared protected garden and are assessed against that setting. Kensington and Chelsea's Article 4 directions remove permitted development rights for basements, for minor alterations in conservation areas including works to windows, and for commercial to residential conversion. Basement schemes and window replacement therefore both need a full planning application. Many addresses are flats within subdivided houses, which have no permitted development rights in any case.
Typical Notting Hill housing stock
Mid-Victorian stucco-fronted terraces laid out around communal garden squares, built as single houses and now a mix of whole houses and large subdivided flats.
Streets we regularly draw for in Notting Hill
Portobello Road · Lansdowne Road · Elgin Crescent · Clarendon Road
What W11 is actually built of
Measured from 146 classified residential buildings in W11, not from a description of the area.
Notting Hill W11 housing mix
Residential building form across the W11 postcode district, from 146 classified buildings.
| Attached on more than one side | 84% |
|---|---|
| Attached on one side | 13% |
| Detached | 3% |
| Median building footprint | 75 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.65 |
| Buildings classified | 146 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Hip-to-Gable Loft Conversion Drawings for Notting Hill (W11) homes: the package and the process
The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.
Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.
The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.
What is a hip-to-gable loft conversion?
A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.
- Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
- Squares off the roof by rebuilding the sloping hip as a vertical gable wall
- Leaves the front and rear roof slopes untouched
Is a hip-to-gable loft conversion permitted development?
Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.
What is a hip-to-gable-plus-dormer conversion?
Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.
| Conversion | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Hip-to-gable only | Permitted development / LDC | New gable wall and rafter tie-in | £1,300 |
| Hip-to-gable plus rear dormer | Permitted development / LDC where eligible | Gable wall plus dormer structure | £1,450 |
| Hip-to-gable in a conservation area | Householder planning | New gable wall and rafter tie-in | £1,600 |
Hip-to-Gable Loft Conversion Drawings in Notting Hill W11 — FAQs
How much do hip-to-gable loft conversion drawings cost in London?+
Will my semi-detached house qualify for permitted development?+
How long do hip-to-gable drawings take?+
Do I need an architect for a hip-to-gable conversion?+
What building regulations apply to a hip-to-gable loft?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free Notting Hill planning assessment
Tell us your Notting Hill (W11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.