Hip-to-Gable Loft Conversion Drawings in Golders Green NW11
Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Golders Green (NW11) homeowners — London Borough of Barnet validation and local constraints handled from the start.
Golders Green (NW11) contains two very different designations. The Golders Green conservation area covers the Edwardian and interwar core around Golders Green Road and Hoop Lane. To the north-east lies Hampstead Garden Suburb — a planned Arts and Crafts estate that is one of the most tightly controlled residential environments in London, and Barnet has an Article 4 direction covering it.
That Article 4 direction is the single most important fact for anyone building in the Suburb: it removes permitted development rights across the conservation area, so even modest external work needs a full planning application. Because the Suburb was designed as a complete composition, the controls extend past the buildings to the hedge lines, materials and rooflines that make up the original scheme — a level of detail most London conservation areas do not reach. Barnet's separate HMO Article 4 direction removes the permitted change to small houses in multiple occupation across the district. We establish whether an NW11 address is inside the Suburb boundary before drawing to Barnet's guidance, because the answer changes the entire route to consent.
Planning in Golders Green (NW11): what to know before you apply
NW11 spans two conservation areas with very different regimes. Hampstead Garden Suburb is covered by a Barnet Article 4 direction removing permitted development rights across the Suburb, so even modest external alterations need a full planning application, and because the Suburb is a planned Arts and Crafts composition the controls extend to hedge lines, materials and rooflines as part of the original design. The Golders Green conservation area controls the Edwardian and interwar core around Golders Green Road. Barnet's HMO Article 4 direction also removes the permitted change to small houses in multiple occupation across the district.
Typical Golders Green housing stock
Edwardian and interwar semi-detached and detached houses around Golders Green Road and Hoop Lane, and the planned Arts and Crafts housing of Hampstead Garden Suburb toward Temple Fortune.
Streets we regularly draw for in Golders Green
Golders Green Road · Finchley Road · Hoop Lane · Temple Fortune Lane
What NW11 is actually built of
Measured from 428 classified residential buildings in NW11, not from a description of the area.
Golders Green NW11 housing mix
Residential building form across the NW11 postcode district, from 428 classified buildings.
| Attached on more than one side | 21% |
|---|---|
| Attached on one side | 61% |
| Detached | 18% |
| Median building footprint | 95 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.51 |
| Buildings classified | 428 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Hip-to-Gable Loft Conversion Drawings for Golders Green (NW11) homes: the package and the process
The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.
Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.
The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.
What is a hip-to-gable loft conversion?
A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.
- Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
- Squares off the roof by rebuilding the sloping hip as a vertical gable wall
- Leaves the front and rear roof slopes untouched
Is a hip-to-gable loft conversion permitted development?
Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.
What is a hip-to-gable-plus-dormer conversion?
Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.
| Conversion | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Hip-to-gable only | Permitted development / LDC | New gable wall and rafter tie-in | £1,300 |
| Hip-to-gable plus rear dormer | Permitted development / LDC where eligible | Gable wall plus dormer structure | £1,450 |
| Hip-to-gable in a conservation area | Householder planning | New gable wall and rafter tie-in | £1,600 |
Hip-to-Gable Loft Conversion Drawings in Golders Green NW11 — FAQs
How much do hip-to-gable loft conversion drawings cost in London?+
Will my semi-detached house qualify for permitted development?+
How long do hip-to-gable drawings take?+
Do I need an architect for a hip-to-gable conversion?+
What building regulations apply to a hip-to-gable loft?+
Do I need planning permission for a loft or extension in Barnet?+
What is different about building in Hampstead Garden Suburb?+
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
How long does Barnet take to decide an application?+
How much do Barnet planning drawings cost?+
Get your free Golders Green planning assessment
Tell us your Golders Green (NW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.