Flat Conversion Drawings in South Kensington SW7
Fixed-fee, MCIAT-chartered flat conversion drawings for South Kensington (SW7) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
South Kensington (SW7) is the borough's museum quarter — vast Italianate stucco terraces along Queen's Gate and the Thurloe and Boltons estates, together with grand mansion flats. Much of the stock is listed, so schemes here focus on internal remodelling, roof and rear alterations, and deep basement works rather than alterations to the protected street frontages.
Because SW7 combines dense conservation-area coverage with widespread listing, we prepare measured drawings and heritage-led justification to the Royal Borough of Kensington and Chelsea's standard, managing listed-building consent and the borough's exacting limits on basement depth and construction logistics.
Planning in South Kensington (SW7): what to know before you apply
No published householder Article 4 direction applies, yet conservation-area designation across SW7 already removes most permitted-development rights and listed-building consent is frequently required. RBKC's subterranean development policy typically restricts basements to a single storey with strict construction-management conditions.
Typical South Kensington housing stock
SW7 is the museum-quarter heart of the borough — monumental Italianate stucco terraces along Queen's Gate and the Thurloe and Boltons estates, plus substantial red-brick mansion blocks. A large share is listed, so work runs to internal reconfiguration, roof and rear alterations, and heavily engineered basement schemes rather than changes to the imposing frontages.
Streets we regularly draw for in South Kensington
Queen's Gate · Walton Street · Prince Consort Road · Gledhow Gardens
What SW7 is actually built of
Measured from 181 classified residential buildings in SW7, not from a description of the area.
South Kensington SW7 housing mix
Residential building form across the SW7 postcode district, from 181 classified buildings.
| Attached on more than one side | 89% |
|---|---|
| Attached on one side | 11% |
| Detached | 1% |
| Median building footprint | 85 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 4.86 |
| Buildings classified | 181 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for South Kensington (SW7) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in South Kensington SW7 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free South Kensington planning assessment
Tell us your South Kensington (SW7) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.