Flat Conversion Drawings in Nunhead SE15
Fixed-fee, MCIAT-chartered flat conversion drawings for Nunhead (SE15) homeowners — London Borough of Southwark validation and local constraints handled from the start.
Nunhead (SE15) is a largely Victorian terraced neighbourhood on the rising ground between Nunhead Cemetery and Peckham Rye, and as the area has gentrified the demand has shifted firmly toward side-return, rear and loft extensions on family houses. Because so many properties share the same terraced footprint, Southwark's design expectations for extension depth and dormers here are well established.
Conservation pockets around Nunhead Cemetery, Nunhead Green and Telegraph Hill bring tighter control over roof form, materials and frontages than the surrounding streets carry. We check where a Nunhead property sits relative to those boundaries before recommending a permitted-development or full-application route, and draw the scheme to Southwark's residential guidance so it is assessed cleanly.
Planning in Nunhead (SE15): what to know before you apply
SE15 has no published householder Article 4 direction affecting typical Nunhead work, so many houses retain permitted development rights for rear and loft projects — but the conservation pockets around Nunhead Cemetery, Nunhead Green and Telegraph Hill are the exceptions where roof and frontage changes are more closely controlled.
Typical Nunhead housing stock
Victorian and Edwardian terraces on the streets rising between Nunhead Cemetery and Peckham Rye, largely two-storey family houses with rear gardens, plus a share of houses converted into flats.
Streets we regularly draw for in Nunhead
Solway Road · Kinsale Road · Dovedale Road · Mundania Road
What SE15 is actually built of
Measured from 458 classified residential buildings in SE15, not from a description of the area.
Nunhead SE15 housing mix
Residential building form across the SE15 postcode district, from 458 classified buildings.
| Attached on more than one side | 71% |
|---|---|
| Attached on one side | 26% |
| Detached | 3% |
| Median building footprint | 61 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.15 |
| Buildings classified | 458 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Nunhead (SE15) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Nunhead SE15 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for an extension in Southwark?+
What is the Dulwich Estate scheme of management?+
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
How long does Southwark Council take to decide?+
How much do planning drawings cost in Southwark?+
Get your free Nunhead planning assessment
Tell us your Nunhead (SE15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.