Flat Conversion Drawings in Kidbrooke SE3
Fixed-fee, MCIAT-chartered flat conversion drawings for Kidbrooke (SE3) homeowners — Royal Borough of Greenwich validation and local constraints handled from the start.
Kidbrooke (SE3) is a district defined by change: the system-built Ferrier Estate has been cleared and rebuilt as Kidbrooke Village, one of the largest housing regeneration schemes in south-east London, ringed by surviving interwar and postwar suburban housing. Householder extension and loft work concentrates on those older semi-detached and terraced houses on the fringes, where drawings have to respond to a genuinely mixed streetscape.
There is no conservation area covering Kidbrooke — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the scale of the ongoing regeneration and by the varied older housing around it, read against the Royal Borough of Greenwich's householder design expectations. We treat the immediate context of each house, rather than a conservation designation, as the reference point when we design an extension.
Across streets like Westbrook Road, Dursley Road and Whetstone Road, demand is steady for rear extensions, side infills and loft conversions on the interwar and postwar houses. We check each property's permitted-development position against Greenwich's borough-wide controls — and, on newer Kidbrooke Village homes, any developer conditions or covenants — before preparing drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Kidbrooke (SE3): what to know before you apply
Greenwich assesses Kidbrooke extensions against the immediate context, which varies from new-build village blocks to older interwar and postwar houses, so the design has to respond to each house rather than a single estate pattern. There is no conservation area and no local Article 4 direction, so many older houses retain permitted development rights for rear and loft work — but on newer homes, developer conditions and covenants can restrict alterations, and neighbour amenity and building lines remain the points a householder application is judged on.
Typical Kidbrooke housing stock
A rapidly changing mix of new-build Kidbrooke Village apartments and houses alongside surviving interwar and postwar semi-detached and terraced homes on the fringes. The suburban houses around the regeneration area are where most householder extension and loft work happens.
Streets we regularly draw for in Kidbrooke
Blackheath Park · Charlton Park Lane · Morden Road · Sweyn Place · Paddock Close · The Lane · The Hall · Liskeard Gardens · Westbrook Road · St Germans Place · Dursley Road · Whetstone Road
What SE3 is actually built of
Measured from 411 classified residential buildings in SE3, not from a description of the area.
Kidbrooke SE3 housing mix
Residential building form across the SE3 postcode district, from 411 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 41% |
| Detached | 16% |
| Median building footprint | 67 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.2 |
| Buildings classified | 411 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Kidbrooke (SE3) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Kidbrooke SE3 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission to extend a house in Kidbrooke?+
Is Kidbrooke in a conservation area?+
How much do planning and building-regulation drawings cost for a Kidbrooke extension?+
How long does the Royal Borough of Greenwich take to decide?+
Get your free Kidbrooke planning assessment
Tell us your Kidbrooke (SE3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.