Double Storey Extension Drawings in Tolworth KT6
Fixed-fee, MCIAT-chartered double storey extension drawings for Tolworth (KT6) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
Tolworth in KT6 is an interwar suburb of bay-fronted semis and terraces gathered around the Broadway and Tolworth Tower. Because plots are relatively generous, most projects here are single-storey rear extensions, side-return infills and loft conversions, many of which fall within permitted development when designed correctly to Royal Borough of Kingston upon Thames rules.
Even where planning permission is not needed, the permitted-development limits on depth, height and materials must be proven, and a lawful development certificate is often the safest route. Around Fishponds Park and the greener streets we take extra care with amenity and boundaries, and we produce the drawings and calculations Kingston expects for building control sign-off.
Planning in Tolworth (KT6): what to know before you apply
Tolworth has no published householder Article 4 direction, so many houses retain full permitted-development rights for rear and side extensions and loft conversions; we frequently secure lawful development certificates to confirm this. Genuine planning constraints are concentrated near Fishponds Park and where extensions affect neighbouring amenity.
Typical Tolworth housing stock
Tolworth is a classic 1930s suburb of bay-fronted semi-detached and short terraced houses laid out around the Broadway and the landmark Tolworth Tower. The wide plots and side access make single-storey rear extensions, side infills and loft conversions the mainstay, with many homes still holding good permitted-development potential.
Streets we regularly draw for in Tolworth
Ewell Road · King Charles' Road · Raeburn Avenue · Sandhurst Avenue
What KT6 is actually built of
Measured from 309 classified residential buildings in KT6, not from a description of the area.
Tolworth KT6 housing mix
Residential building form across the KT6 postcode district, from 309 classified buildings.
| Attached on more than one side | 30% |
|---|---|
| Attached on one side | 49% |
| Detached | 21% |
| Median building footprint | 72 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.88 |
| Buildings classified | 309 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Tolworth (KT6) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Tolworth KT6 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Tolworth planning assessment
Tell us your Tolworth (KT6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.