Double Storey Extension Drawings in Kingston KT1
Fixed-fee, MCIAT-chartered double storey extension drawings for Kingston (KT1) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
Kingston (KT1) is the historic heart of the Royal Borough, where the Kingston Old Town conservation area — designated in 1971 and covering some 334 properties — protects a medieval market-town core around All Saints Church and Market Place.
KT1 also contains the Fairfield / Knight's Park and Grove Crescent conservation areas, Victorian residential estates built in the 1860s and 1870s where alterations to terraces and villas are assessed against the area's original character.
Planning in Kingston (KT1): what to know before you apply
Most central KT1 houses fall inside the Kingston Old Town, Fairfield / Knight's Park or Grove Crescent conservation areas, so even modest rear or roof extensions are judged against a Victorian or older grain. Because Kingston publishes no Article 4 rows to the national register, confirm the live position on the council's Article 4 map before relying on any permitted-development right.
Typical Kingston housing stock
Victorian terraces and semi-detached villas around Knight's Park and Grove Crescent, set against the medieval market-town core of Kingston Old Town where the street pattern around All Saints Church and Market Place is the best-preserved of its type in outer London.
Streets we regularly draw for in Kingston
Grove Crescent · Knight's Park · Mill Street · Fairfield North
What KT1 is actually built of
Measured from 204 classified residential buildings in KT1, not from a description of the area.
Kingston KT1 housing mix
Residential building form across the KT1 postcode district, from 204 classified buildings.
| Attached on more than one side | 29% |
|---|---|
| Attached on one side | 57% |
| Detached | 14% |
| Median building footprint | 65 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.68 |
| Buildings classified | 204 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Kingston (KT1) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Kingston KT1 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Kingston planning assessment
Tell us your Kingston (KT1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.