MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Islington N1

Georgian terrace conversion drawings in Islington N1, London Borough of Islington
Islington · N1 · Islington

Double Storey Extension Drawings in Islington N1

Fixed-fee, MCIAT-chartered double storey extension drawings for Islington (N1) homeowners — London Borough of Islington validation and local constraints handled from the start.

Free Islington planning assessment

Tell us your Islington (N1) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Islington (N1) is one of London's most tightly protected Georgian districts — the terraces and squares around Upper Street, Liverpool Road and Duncan Terrace are largely early-nineteenth-century, and a large share of them are either listed or sit inside a conservation area. That combination makes N1 a district where the drawings, not the ambition, decide whether a scheme is consentable.

The Regent's Canal conservation area runs through N1 and controls the canal-side setting, which means rear elevations and roof alterations visible from the towpath are assessed on their contribution to that view rather than in isolation. Combined with the shallow rear gardens typical of the Georgian plots, most successful N1 projects are loft and lower-ground work rather than deep rear extensions. We check the listing register and the conservation-area boundary for an N1 address before drawing anything to Islington's guidance.

Georgian terrace conversion drawings in Islington N1, London Borough of Islington
Isometric illustration of a Islington N1 home double storey extension drawings design
Proposed floor plan
Islington N1

Planning in Islington (N1): what to know before you apply

N1 had no householder Article 4 direction intersect our sample of the district, but that offers little practical freedom here: the density of listed Georgian terraces means listed building consent, not permitted development, is the governing question on most Islington streets, and the Regent's Canal conservation area controls the canal-side setting including rear elevations seen from the towpath. Shallow Georgian rear gardens are the other hard limit on extension depth.

Typical Islington housing stock

Georgian and early-Victorian terraces and squares around Upper Street and Barnsbury, many listed or in conservation areas, with canal-side former warehouses and later infill toward the City fringe.

Streets we regularly draw for in Islington

Upper Street · Liverpool Road · Noel Road · Duncan Terrace

What N1 is actually built of

Measured from 515 classified residential buildings in N1, not from a description of the area.

Islington N1 housing mix

Residential building form across the N1 postcode district, from 515 classified buildings.

Attached on more than one side78%
Attached on one side17%
Detached5%
Median building footprint55 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate3.32
Buildings classified515

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Double Storey Extension Drawings for Islington (N1) homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package drawn for a Islington property in N1, showing the existing and proposed arrangement at scale
A sheet from the double storey extension drawings package we submit to London Borough of Islington for Islington (N1) properties.
FAQ

Double Storey Extension Drawings in Islington N1 — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for an extension or loft in Islington?+
Usually, yes. Islington is among the most conservation-covered boroughs in London: Barnsbury, Canonbury and Duncan Terrace sit within designated areas where permitted development rights have largely been removed, so even modest external works often need a full application. We confirm the designation for your street first and design to the conservation-led expectations rather than assuming permitted development.
My Islington property is a converted flat — can I still extend?+
Often, but the flat-conversion context changes what is deliverable. Ownership, lease and party-wall considerations shape whether a rear or roof extension is possible, and the freeholder's agreement is usually needed alongside planning. We check the ownership and structural context before drawing so the scheme is realistic from the outset.
How does Islington's tight plot size affect what I can build?+
Many Islington terraces have limited rear-garden depth, so extension design is about making the most of a compact footprint — rooflights, careful massing and internal reconfiguration — rather than large additions. We design to the plot and the borough's amenity and party-wall expectations so neighbours' daylight and outlook are respected, which is what carries these applications.
How long does Islington Council take to decide?+
Islington determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. We prepare submissions to the council's validation checklist with the elevations and materials detail the council expects, to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Islington?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Islington approves. A conservation-area application and a flat-conversion scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Islington planning assessment

Tell us your Islington (N1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.