MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Bexleyheath DA6

Loft conversion with skylights in an inter-war Bexleyheath DA6 semi, London Borough of Bexley
Bexleyheath · DA6 · Bexley

Double Storey Extension Drawings in Bexleyheath DA6

Fixed-fee, MCIAT-chartered double storey extension drawings for Bexleyheath (DA6) homeowners — London Borough of Bexley validation and local constraints handled from the start.

Free Bexleyheath planning assessment

Tell us your Bexleyheath (DA6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Bexleyheath (DA6) grew up as an inter-war and post-war suburb around the Broadway shopping centre, so most of its housing is 1920s-1950s semi-detached and detached stock where loft conversions and rear extensions are the staple jobs. The bulk of the district sits outside any conservation area, which keeps many householder projects within permitted-development limits.

The exceptions are two nationally important heritage sites: the Red House Lane Conservation Area protecting William Morris's 1859 Arts-and-Crafts house off Upton Road, and Danson Park with its Grade II registered landscape and Georgian Danson House. Work near those boundaries, and to any listed building, is assessed far more tightly than on the surrounding suburban streets.

Loft conversion with skylights in an inter-war Bexleyheath DA6 semi, London Borough of Bexley
Isometric illustration of a Bexleyheath DA6 home double storey extension drawings design
Proposed floor plan
Bexleyheath DA6

Planning in Bexleyheath (DA6): what to know before you apply

Most DA6 householder work sits outside any conservation area and can proceed under permitted development, but projects near the Red House Lane Conservation Area or the Danson Park registered landscape are judged on their impact on those settings and usually need a full application. Because Bexley applies Article 4 directions to some but not all of its conservation areas, we confirm on the council's conservation map whether a specific property is caught before assuming permitted-development rights survive.

Typical Bexleyheath housing stock

Bexleyheath is dominated by inter-war and post-war semi-detached and detached suburban housing laid out around the Broadway, punctuated by two national heritage anchors — Philip Webb's red-brick Red House of 1859-60 off Upton Road and the Georgian Danson House in its Grade II registered parkland.

Streets we regularly draw for in Bexleyheath

Red House Lane · Upton Road · Danson Road · Long Lane

What DA6 is actually built of

Measured from 227 classified residential buildings in DA6, not from a description of the area.

Bexleyheath DA6 housing mix

Residential building form across the DA6 postcode district, from 227 classified buildings.

Attached on more than one side28%
Attached on one side60%
Detached12%
Median building footprint69 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.26
Buildings classified227

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Double Storey Extension Drawings for Bexleyheath (DA6) homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package drawn for a Bexleyheath property in DA6, showing the existing and proposed arrangement at scale
A sheet from the double storey extension drawings package we submit to London Borough of Bexley for Bexleyheath (DA6) properties.
FAQ

Double Storey Extension Drawings in Bexleyheath DA6 — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for an extension in Bexley?+
Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Conservation areas such as Old Bexley Village and Danson Park, and riverside flood-zone constraints toward Erith, restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.
Can I build a bigger extension because Bexley plots are larger?+
Often, yes. The generous interwar plots across Bexleyheath, Sidcup and Welling make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually design and amenity policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.
What extra control applies in Old Bexley Village or around Danson Park?+
These conservation areas carry design control over materials, rooflines and front elevations, and the Upton area of Bexleyheath includes the setting of William Morris's Red House. Permitted development is often restricted there, so we design to the area's character and prepare a full, context-led application where a standard permitted-development route doesn't apply.
How long does Bexley Council take to decide?+
Bexley determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Bexley drawings to the council's checklist to keep the application on track.
How much do planning drawings cost in Bexley?+
We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bexley approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey — and we confirm it once we understand your plans.
Free Fixed Quote

Get your free Bexleyheath planning assessment

Tell us your Bexleyheath (DA6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.