Double Storey Extension Drawings in Belgravia SW1X
Fixed-fee, MCIAT-chartered double storey extension drawings for Belgravia (SW1X) homeowners — Westminster City Council validation and local constraints handled from the start.
Belgravia (SW1X) is the Grosvenor estate at its grandest — stucco-fronted terraces and garden squares where the dominant work is careful internal reconfiguration of large townhouses and mansion flats, basement formation, and servicing upgrades rather than the rear extensions typical of outer London. The planning context is among the most demanding in the country, and the drawings have to reflect that from the first line.
Because so much of the stock is listed and every street sits within the Belgravia conservation area, most projects turn on listed-building consent as much as planning, and any lower-ground or basement scheme runs straight into Westminster's strict subterranean policy. We establish the listing grade, the conservation boundary and the Grosvenor estate's separate freeholder requirements before drawing, and prepare the application to Westminster City Council's validation standard.
Planning in Belgravia (SW1X): what to know before you apply
There is no published householder Article 4 direction that changes the picture in SW1X because the real controls are stronger still: pervasive statutory listing, blanket Belgravia conservation-area status and Westminster's restrictive basement policy. Grosvenor estate leaseholders also need freeholder licence for alterations, which we account for alongside the council submission.
Typical Belgravia housing stock
Grand white-stucco terraces and set-piece garden squares laid out for the Grosvenor estate from the 1820s — Eaton Square, Belgrave Square and their tributary streets — behind them cobbled mews and a layer of later mansion flats, much of it statutorily listed and held on long leases.
Streets we regularly draw for in Belgravia
Eccleston Square · Hugh Street · Warwick Way · St George's Drive
What SW1X is actually built of
Measured from 130 classified residential buildings in SW1X, not from a description of the area.
Belgravia SW1X housing mix
Residential building form across the SW1X postcode district, from 130 classified buildings.
| Attached on more than one side | 96% |
|---|---|
| Attached on one side | 4% |
| Detached | 0% |
| Median building footprint | 108 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.79 |
| Buildings classified | 130 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Belgravia (SW1X) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Belgravia SW1X — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for works in Westminster?+
I live in a mansion block — what extra consent might I need?+
Will I need a Basement Impact Assessment in Westminster?+
How long does Westminster City Council take to decide?+
How much do planning drawings cost in Westminster?+
Get your free Belgravia planning assessment
Tell us your Belgravia (SW1X) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.