MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportArchitectural Drawings in Putney SW15

Open-plan kitchen extension interior in a Putney SW15 Victorian house near the Thames, Wandsworth
Putney · SW15 · Wandsworth

Architectural Drawings in Putney SW15

Fixed-fee, MCIAT-chartered architectural drawings for Putney (SW15) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Free Putney planning assessment

Tell us your Putney (SW15) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Putney (SW15) is unusually heavily conservation-controlled for an outer-inner London neighbourhood: five separate conservation areas — Putney Embankment, West Putney, East Putney, Charlwood Road & Lifford Street, and Oxford Road — cover a large share of the housing. Whether a property sits inside one of those boundaries is the single biggest factor in how an extension or loft is designed and assessed.

Add the Thames on the northern edge, and riverside and Embankment properties also carry flood-zone considerations that have to be addressed in the application. We map a Putney property against the conservation and flood-zone boundaries first, then design the drawings to Wandsworth's residential guidance so the application is validated without a query.

Open-plan kitchen extension interior in a Putney SW15 Victorian house near the Thames, Wandsworth
Isometric illustration of a Putney SW15 home architectural drawings design
Proposed floor plan
Putney SW15

Planning in Putney (SW15): what to know before you apply

SW15 has no householder Article 4 direction, but its five conservation areas mean permitted development cannot be assumed across much of Putney, and riverside properties near the Embankment sit within the Thames flood zone — both are checked before we recommend a route.

Typical Putney housing stock

Victorian and Edwardian terraces on the streets climbing from the river, riverside mansion blocks along the Embankment, and interwar semi-detached houses toward Putney Heath and Roehampton.

Streets we regularly draw for in Putney

Putney High Street · Upper Richmond Road · Lower Richmond Road · Disraeli Road

What SW15 is actually built of

Measured from 341 classified residential buildings in SW15, not from a description of the area.

Putney SW15 housing mix

Residential building form across the SW15 postcode district, from 341 classified buildings.

Attached on more than one side55%
Attached on one side34%
Detached10%
Median building footprint71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.14
Buildings classified341

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Putney (SW15) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

  • Concept and feasibility sketches
  • Planning drawings for the local authority
  • Building regulations drawings with construction detail
  • Structural drawings and calculations
  • Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
FactorArchitectural TechnologistArchitect
Council-accepted drawingsYesYes
Typical fee~30% lowerHigher
Structural coordinationIn-houseOften outsourced
Typical drawing turnaround~7 daysSeveral weeks
Best forExtensions, lofts, conversionsBespoke new-build design
Sheet from a architectural drawings package drawn for a Putney property in SW15, showing the existing and proposed arrangement at scale
A sheet from the architectural drawings package we submit to London Borough of Wandsworth for Putney (SW15) properties.
FAQ

Architectural Drawings in Putney SW15 — FAQs

Are architectural drawings the same as planning drawings?+
Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.
Will a technologist's drawings be accepted by my council?+
Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.
Can you take my project all the way to construction?+
Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.
Do I own the architectural drawings you produce?+
Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.
Can I commission just the planning stage for now?+
Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.
Do I need planning permission for a side-return extension in Wandsworth?+
On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.
What does Wandsworth's basement Article 4 direction mean for me?+
In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.
How long will Wandsworth take to decide my application?+
Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.
Can you design an extension for a converted flat near the commons?+
Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.
How much do Wandsworth planning drawings cost?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.
Free Fixed Quote

Get your free Putney planning assessment

Tell us your Putney (SW15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.