
Side Return Extension Drawings in Wandsworth
Fixed-fee, MCIAT-chartered side return extension drawings for Wandsworth homeowners — London Borough of Wandsworth validation and local constraints handled from the start.
Wandsworth is defined by its long Victorian and Edwardian terraced grids — the 'between the commons' streets — where the side-return and rear extension is the most requested householder project and the London Borough of Wandsworth's design expectations are well established. These are consistent house types repeated street after street, so the borough has clear views on rear depth, roof form and side-return design, and a technologist who knows the local pattern can meet those expectations first time rather than discovering them through revisions.
Where you are in the borough shapes the route. Conservation areas such as Wandsworth Common, Tonsley, Nightingale Lane, Clapham Common and Battersea Park tighten control over rooflines, materials and side-return design, and the council applies Article 4 directions to basement development in parts of the borough, requiring a Basement Impact Assessment covering structural stability, drainage and groundwater. Near the riverside, Thames flood-zone considerations also come into play, while much of Battersea and the streets around the commons is Edwardian mansion blocks and converted flats where ownership, lease and party-wall context matters as much as the planning route.
We prepare Wandsworth planning drawings to the borough's residential extension and basement guidance, checking permitted development eligibility and any conservation-area or basement Article 4 constraint for your exact address before design begins, and coordinating structural calculations in-house so these party-wall-sensitive terraces are handled cleanly. The fee is fixed and agreed up front — typically around 30% below an architect's charge for the same council-accepted drawings — with free redraws until Wandsworth approves. Because we draw to the validation checklist, most householder applications move through the council's statutory eight-week determination without the drawing query that is the usual cause of delay, and our ~7-day drawing turnaround keeps schemes moving from the outset.


Planning in Wandsworth: what to know before you apply
Wandsworth applies Article 4 directions to basement development in parts of the borough, requiring a basement impact assessment, and several conservation areas control roof and side-return design. Terraced side-returns are common enough that the council has clear expectations — meeting them first time is straightforward when the drawings are right.
Typical Wandsworth housing stock
Long grids of Victorian and Edwardian terraces — the 'between the commons' streets — plus Edwardian mansion blocks and riverside conversions.
Areas we regularly draw for in Wandsworth
Clapham · Balham · Putney · Tooting · Battersea · Earlsfield · Southfields
Side Return Extension Drawings for Wandsworth homes: the package and the process
Every side return extension drawings we prepare for a Wandsworth property is drawn to London Borough of Wandsworth’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.
DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
A recent Wandsworth approval
Side Return Extension Drawings across Wandsworth
Side Return Extension Drawings in Wandsworth — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for a side-return extension in Wandsworth?+
What does Wandsworth's basement Article 4 direction mean for me?+
How long will Wandsworth take to decide my application?+
Can you design an extension for a converted flat near the commons?+
How much do Wandsworth planning drawings cost?+
Get your free Wandsworth planning assessment
Tell us your Wandsworth address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.