Rear extension onto a garden behind a 'between the commons' Battersea SW11 Victorian terrace in Wandsworth

Battersea · SW11 · Wandsworth

Side Return Extension Drawings in Battersea SW11

Fixed-fee, MCIAT-chartered side return extension drawings for Battersea (SW11) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Battersea (SW11) in Wandsworth runs from the prized 'between the commons' Victorian terraces near Clapham, through the shops of Lavender Hill and Northcote Road, down to the transformed Nine Elms riverside. On the terraced streets, side-return and rear extensions and loft conversions are the staple projects, and Wandsworth's design expectations for that consistent housing type are well documented.

Two conservation areas shape the district — Battersea Park around the park frontages, and the listed Shaftesbury Park Estate, a Victorian model-cottage estate where control over elevations and roofs is especially tight. We establish where a Battersea property sits relative to those boundaries, and the Thames flood zone near the river, before recommending a route and drawing to Wandsworth's residential guidance.

Proposed floor plan

Battersea SW11

Battersea (SW11) — planning at a glance

Council: London Borough of Wandsworth
Postcode district: SW11
Planning portal: View the Wandsworth planning portal
Housing stock: Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.
Article 4: London Borough of Wandsworth does not publish its Article 4 directions to the national planning register, so permitted development rights in Battersea (SW11) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The Battersea Park and Shaftesbury Park Estate conservation areas and the Nine Elms riverside context are the main controls.
Conservation: Battersea ParkShaftesbury Park Estate
Sample streets: Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill
Local constraints: Battersea Park and Shaftesbury Park Estate conservation areas — the latter a protected Victorian model estate with tight control over elevations and rooflinesThe desirable 'between the commons' terraces, where Wandsworth's rear and side-return depth expectations are well establishedThames riverside flood-zone and tall-building context around the Nine Elms regeneration area

Planning in Battersea (SW11): what to know before you apply

SW11 has no householder Article 4 direction, so many Battersea terraces retain permitted development rights — but the Shaftesbury Park Estate model-cottage conservation area is a significant exception with tight elevation control, and riverside plots toward Nine Elms sit within the Thames flood zone.

Typical Battersea housing stock

Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.

Streets we regularly draw for in Battersea

Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill

Side Return Extension Drawings for Battersea (SW11) homes: the package and the process

Every side return extension drawings we prepare for an Battersea property is drawn to London Borough of Wandsworth’s validation standards and tuned to the SW11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.

DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Also in Battersea SW11

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Wandsworth Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Battersea SW11 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission for a side-return extension in Wandsworth?+

On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.

What does Wandsworth's basement Article 4 direction mean for me?+

In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.

How long will Wandsworth take to decide my application?+

Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.

Can you design an extension for a converted flat near the commons?+

Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.

How much do Wandsworth planning drawings cost?+

We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.

Free Fixed Quote

Get your free Battersea planning assessment

Tell us your Battersea (SW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.