Loft conversion with skylights in an inter-war Bexleyheath DA6 semi, London Borough of Bexley

Bexleyheath · DA6 · Bexley

Side Return Extension Drawings in Bexleyheath DA6

Fixed-fee, MCIAT-chartered side return extension drawings for Bexleyheath (DA6) homeowners — London Borough of Bexley validation and local constraints handled from the start.

Bexleyheath (DA6) grew up as an inter-war and post-war suburb around the Broadway shopping centre, so most of its housing is 1920s-1950s semi-detached and detached stock where loft conversions and rear extensions are the staple jobs. The bulk of the district sits outside any conservation area, which keeps many householder projects within permitted-development limits.

The exceptions are two nationally important heritage sites: the Red House Lane Conservation Area protecting William Morris's 1859 Arts-and-Crafts house off Upton Road, and Danson Park with its Grade II registered landscape and Georgian Danson House. Work near those boundaries, and to any listed building, is assessed far more tightly than on the surrounding suburban streets.

Proposed floor plan

Bexleyheath DA6

Bexleyheath (DA6) — planning at a glance

Council: London Borough of Bexley
Postcode district: DA6
Planning portal: View the Bexley planning portal
Housing stock: Bexleyheath is dominated by inter-war and post-war semi-detached and detached suburban housing laid out around the Broadway, punctuated by two national heritage anchors — Philip Webb's red-brick Red House of 1859-60 off Upton Road and the Georgian Danson House in its Grade II registered parkland.
Article 4: London Borough of Bexley does not publish its Article 4 directions to the national planning register, so permitted development rights in Bexleyheath (DA6) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No Article 4 direction is confirmed for the Red House Lane or Danson Park conservation areas specifically; because Bexley applies Article 4(2) directions to several — but not all — of its conservation areas, confirm on the council's own conservation map whether one covers a given DA6 property before relying on permitted development.
Conservation: Red House LaneDanson Park
Sample streets: Red House Lane · Upton Road · Danson Road · Long Lane
Local constraints: Red House Lane Conservation Area protecting the setting of Philip Webb's 1859-60 Red House off Upton RoadDanson Park Grade II registered historic park and garden, with the Georgian Danson House as a listed anchor, constraining development on its fringesLarge parts of the inter-war suburb fall outside any conservation area, so permitted-development limits govern most rear and loft workMature suburban street trees on several DA6 roads carrying Tree Preservation Orders

Planning in Bexleyheath (DA6): what to know before you apply

Most DA6 householder work sits outside any conservation area and can proceed under permitted development, but projects near the Red House Lane Conservation Area or the Danson Park registered landscape are judged on their impact on those settings and usually need a full application. Because Bexley applies Article 4 directions to some but not all of its conservation areas, we confirm on the council's conservation map whether a specific property is caught before assuming permitted-development rights survive.

Typical Bexleyheath housing stock

Bexleyheath is dominated by inter-war and post-war semi-detached and detached suburban housing laid out around the Broadway, punctuated by two national heritage anchors — Philip Webb's red-brick Red House of 1859-60 off Upton Road and the Georgian Danson House in its Grade II registered parkland.

Streets we regularly draw for in Bexleyheath

Red House Lane · Upton Road · Danson Road · Long Lane

Side Return Extension Drawings for Bexleyheath (DA6) homes: the package and the process

Every side return extension drawings we prepare for an Bexleyheath property is drawn to London Borough of Bexley’s validation standards and tuned to the DA6 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.

DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Also in Bexleyheath DA6

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Bexley Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Bexleyheath DA6 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission for an extension in Bexley?+

Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Conservation areas such as Old Bexley Village and Danson Park, and riverside flood-zone constraints toward Erith, restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bexley plots are larger?+

Often, yes. The generous interwar plots across Bexleyheath, Sidcup and Welling make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually design and amenity policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.

What extra control applies in Old Bexley Village or around Danson Park?+

These conservation areas carry design control over materials, rooflines and front elevations, and the Upton area of Bexleyheath includes the setting of William Morris's Red House. Permitted development is often restricted there, so we design to the area's character and prepare a full, context-led application where a standard permitted-development route doesn't apply.

How long does Bexley Council take to decide?+

Bexley determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Bexley drawings to the council's checklist to keep the application on track.

How much do planning drawings cost in Bexley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bexley approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Bexleyheath planning assessment

Tell us your Bexleyheath (DA6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.