Side Return Extension Drawings in Bexley
Fixed-fee, MCIAT-chartered side return extension drawings for Bexley homeowners — London Borough of Bexley validation and local constraints handled from the start.
Bexley is predominantly interwar suburban London: semi-detached houses dominant across Bexleyheath, Sidcup and Welling, the historic core of Old Bexley Village with its Victorian and older housing, and riverside and post-war housing running toward Erith, Belvedere and the Thames. The generous suburban plots make rear and double-storey extensions and loft conversions the borough's most requested projects, and they frequently allow larger schemes than the tight terraces of inner London could ever accommodate.
Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached and detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify without a full application. The binding constraints instead are conservation-area control in Old Bexley Village, Danson Park and the Upton area of Bexleyheath — home to William Morris's Red House — as well as Blendon, Lamorbey and Crayford Town, and the council's expectation that extensions respect the consistent interwar building line. Thames-side and flood-zone considerations apply toward Erith and the riverside. The practical limit on a Bexleyheath or Sidcup plot is usually design and amenity policy rather than available space.
We prepare Bexley planning drawings that use the available plot fully while respecting conservation and the established suburban building line, checking permitted development limits for semi-detached and detached homes first and confirming eligibility with a Lawful Development Certificate where a project qualifies. Because the borough determines most householder applications within the statutory eight-week period once validated, we prepare submissions validation-first to keep them moving. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until Bexley approves — the same council-accepted drawings an architect would produce, usually at around 30% less.
Planning in Bexley: what to know before you apply
Bexley has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are conservation-area control in Old Bexley Village, Danson Park and the Upton area of Bexleyheath, and the council's expectation that extensions respect the suburban building line. Thames flood-zone considerations apply toward Erith. The borough's semis often retain fuller permitted development rights than inner-London terraces.
Typical Bexley housing stock
Interwar semi-detached suburbia dominant across Bexleyheath, Sidcup and Welling, Victorian and older housing around the historic Old Bexley Village, and riverside and post-war housing toward Erith and Thamesmead.
Areas we regularly draw for in Bexley
Bexleyheath · Sidcup · Welling · Erith · Crayford · Old Bexley · Belvedere · Blackfen
Side Return Extension Drawings for Bexley homes: the package and the process
Every side return extension drawings we prepare for a Bexley property is drawn to London Borough of Bexley’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.
DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings across Bexley
Side Return Extension Drawings in Bexley — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for an extension in Bexley?+
Can I build a bigger extension because Bexley plots are larger?+
What extra control applies in Old Bexley Village or around Danson Park?+
How long does Bexley Council take to decide?+
How much do planning drawings cost in Bexley?+
Get your free Bexley planning assessment
Tell us your Bexley address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.