MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportFlat Conversion Drawings in East Dulwich SE22

Kitchen side-return extension in a Victorian terrace in East Dulwich SE22, London Borough of Southwark
East Dulwich · SE22 · Southwark

Flat Conversion Drawings in East Dulwich SE22

Fixed-fee, MCIAT-chartered flat conversion drawings for East Dulwich (SE22) homeowners — London Borough of Southwark validation and local constraints handled from the start.

Free East Dulwich planning assessment

Tell us your East Dulwich (SE22) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

East Dulwich (SE22) sits in the London Borough of Southwark, tucked between Dulwich Village, Peckham and Forest Hill. Its character comes from the tight grid of late-Victorian and Edwardian terraces — the 'Derbyshire colony' of streets off Lordship Lane, including Melbourne Grove, built in the 1870s and 1880s. Rear, side-return and loft projects on these consistent terraces are the staple here.

The Gardens conservation area lies to the north-east, off East Dulwich Road by Peckham Rye Common, and the Dulwich Village conservation area borders the district to the south, so properties near either boundary answer to heightened design scrutiny. Southwark publishes its Article 4 directions and none covers these householder streets, so many East Dulwich houses keep permitted-development rights — we confirm where an address sits relative to the conservation areas before advising.

Kitchen side-return extension in a Victorian terrace in East Dulwich SE22, London Borough of Southwark
Isometric illustration of a East Dulwich SE22 home flat conversion drawings design
Proposed floor plan
East Dulwich SE22

Planning in East Dulwich (SE22): what to know before you apply

Southwark publishes its Article 4 directions and none covers the East Dulwich householder streets, so many houses retain permitted-development rights for rear and loft work. The Gardens conservation area to the north-east and the Dulwich Village conservation area to the south are the controls that matter near those boundaries, and the consistent Victorian and Edwardian terrace frontages mean dormers and elevation changes are judged against the established grain. We check an address against those designations before drawing.

Typical East Dulwich housing stock

Late-Victorian and Edwardian terraces across the 'Derbyshire colony' streets off Lordship Lane — including Melbourne Grove — with grander villas toward Dulwich Village and the houses fronting Peckham Rye.

Streets we regularly draw for in East Dulwich

Lordship Lane · Melbourne Grove · North Cross Road · Barry Road

Flat Conversion Drawings for East Dulwich (SE22) homes: the package and the process

Every flat conversion drawings we prepare for an East Dulwich property is drawn to London Borough of Southwark’s validation standards and tuned to the SE22 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
ConversionTypical scopeRouteFee from
House to two self-contained flatsVertical split, separate or shared entranceFull planning plus building regulations£1,600
House to three or more flatsMultiple units, fire strategy requiredFull planning plus building regs plus structural£2,400
Flat conversion with a side or rear extensionAdditional floor area added to create compliant unitsFull planning plus structural calculations£2,800
FAQ

Flat Conversion Drawings in East Dulwich SE22 — FAQs

Do I need planning permission to convert a house into flats?+
Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.
How much do flat conversion drawings cost in London?+
Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.
What sound insulation is required between flats?+
Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.
Does each flat need a separate fire escape?+
Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.
What is the minimum size for a flat in London?+
London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.
Do I need planning permission for an extension in Southwark?+
It depends on the area. On Victorian terraces in Camberwell and Peckham a single-storey rear or side-return extension can fall within permitted development, but conservation areas across Camberwell, Dulwich, Bermondsey and Bankside remove or restrict those rights. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What is the Dulwich Estate scheme of management?+
It is a distinctive Southwark consideration: many properties on the Dulwich Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. It is separate from the council's decision, so both must be satisfied. We flag whether the Estate scheme applies to your property before drawing and design to its requirements as well as the council's.
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
Yes. Southwark's riverside quarters carry their own townscape and taller-building context, and conversions there are assessed against conservation and design control near the Thames. We prepare drawings that respond to that setting and the council's design expectations, confirming the constraints for your specific building before design begins.
How long does Southwark Council take to decide?+
Southwark determines most householder applications within the statutory eight-week period once validated; Dulwich, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Southwark?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Southwark approves. A Camberwell terrace extension and a Dulwich Estate application differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free East Dulwich planning assessment

Tell us your East Dulwich (SE22) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.