MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportWraparound Extension Drawings in Willesden NW10

Single-storey rear extension behind an Edwardian terrace in Willesden NW10, London Borough of Brent
Willesden · NW10 · Brent

Wraparound Extension Drawings in Willesden NW10

Fixed-fee, MCIAT-chartered wraparound extension drawings for Willesden (NW10) homeowners — London Borough of Brent validation and local constraints handled from the start.

Free Willesden planning assessment

Tell us your Willesden (NW10) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Willesden (NW10) in Brent is a densely built late-Victorian and Edwardian neighbourhood centred on Willesden High Road and Walm Lane, where rear and loft projects on the terraces and bay-fronted houses are the everyday work. The Willesden Green conservation area — extended in 2024 — now reaches beyond the High Road parades to take in Brondesbury Park, Rutland Park Mansions and the Chatsworth Road and Dean Road streets.

Two conservation areas shape the district: Willesden Green in the centre and Kensal Rise to the south around Chamberlayne Road. Brent also runs an Article 4 direction on converting houses to small HMOs, so we confirm whether a Willesden address sits inside a conservation-area boundary — and whether a scheme is a householder extension or a change of use — before recommending a permitted-development or full-application route.

Single-storey rear extension behind an Edwardian terrace in Willesden NW10, London Borough of Brent
Isometric illustration of a Willesden NW10 home wraparound extension drawings design
Proposed floor plan
Willesden NW10

Planning in Willesden (NW10): what to know before you apply

Willesden houses generally retain permitted development rights for rear and loft work, but the Willesden Green and Kensal Rise conservation areas control frontages and rooflines across much of NW10, and Brent's Article 4 direction removes the right to convert a house to a small HMO without permission. We check the conservation-area boundary and the proposed use first, then draw to Brent's residential extensions guidance.

Typical Willesden housing stock

Late-Victorian and Edwardian terraces and bay-fronted houses on the streets around Willesden High Road and Walm Lane, with mansion blocks along the main roads and pockets of interwar and post-war infill toward Harlesden and Kensal.

Streets we regularly draw for in Willesden

Willesden High Road · Walm Lane · Chatsworth Road · Dean Road

Wraparound Extension Drawings for Willesden (NW10) homes: the package and the process

Every wraparound extension drawings we prepare for an Willesden property is drawn to London Borough of Brent’s validation standards and tuned to the NW10 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.

DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.

What makes a wraparound extension different from a rear or side return alone?

A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.

Do wraparound extensions need full planning permission in London?

Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.

Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.

Wraparound extension planning routes
RouteWhat it coversTypical fee
Full planning permissionRequired for almost all wraparound extensions given the combined footprintFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined pack including structural calculations for the L-shaped frame and drainage diversionPlanning + Building Regs pack ~£2,200–£3,850
Rear extension alone (comparison)Smaller single-storey addition, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Side return alone (comparison)Widens the kitchen only, keeps garden depth unchangedsee Side Return Extension Drawings, from £1,400
FAQ

Wraparound Extension Drawings in Willesden NW10 — FAQs

How much does a wraparound extension cost to design in London?+
Wraparound extension drawings start from £2,200, covering full planning permission and structural design for the combined frame. Adding building regulations and construction detail brings the package to the Planning + Building Regs band, up to around £3,850, fixed and agreed upfront.
Does a wraparound extension always need planning permission?+
In almost every case, yes. The combined depth and width of a rear and side return together generally exceed permitted development limits, so we design wraparound projects on the assumption a full householder planning application is needed.
Do I need an architect for a wraparound extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and structural coordination as an architect, for a fixed fee typically around 30% lower, with one team responsible for both the rear and side return elements rather than two separately briefed designers.
Will I need a Party Wall Agreement for a wraparound extension?+
Usually, because the side return element of a wraparound typically builds against or close to the boundary with the neighbouring property. We prepare the drawings your Party Wall surveyor needs alongside the planning application, timed so the notice period runs in parallel with the council's determination rather than adding to your overall timescale.
How long does it take to get wraparound extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for a side-return extension in Brent?+
On the Victorian and Edwardian terraces of Kilburn, Willesden and Harlesden a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always needed. Conservation areas such as Queen's Park and Mapesbury restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What does Brent's borough-wide HMO Article 4 direction affect?+
Brent applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.
Is a hip-to-gable loft conversion allowed on my Brent semi?+
Frequently, yes. The interwar semis of Wembley, Kingsbury and Sudbury suit hip-to-gable and dormer conversions, which often qualify as permitted development within the volume limits. We confirm eligibility against those limits and any conservation or Article 4 constraint, then produce the planning and building-regulations drawings.
How long does Brent Council take to decide?+
Brent determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The dense terraced streets are party-wall-sensitive, so the commonest delay is a drawing query — we prepare submissions to the council's householder guidance to keep them moving.
How much do planning drawings cost in Brent?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Brent approves. A side-return, a hip-to-gable loft and a conservation-area application differ in complexity, so we quote once we understand your street and project rather than by the hour.
Free Fixed Quote

Get your free Willesden planning assessment

Tell us your Willesden (NW10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.