Wraparound Extension Drawings in Sidcup DA14
Fixed-fee, MCIAT-chartered wraparound extension drawings for Sidcup (DA14) homeowners — London Borough of Bexley validation and local constraints handled from the start.
Sidcup's DA14 streets run from the 1930s semis of the Cray valley to the historic core of Foots Cray village, and most of our work here is rear kitchen extensions and loft conversions that add space to those bay-fronted family homes without losing garden depth.
If your home sits inside the Foots Cray Conservation Area the permitted-development shortcuts narrow, so we always confirm the boundary line first and then advise whether a project runs under permitted development or needs a full householder planning application to Bexley.
Planning in Sidcup (DA14): what to know before you apply
Most DA14 extensions and lofts outside the conservation area proceed under permitted development or a lawful development certificate. Inside the Foots Cray Conservation Area, or where a home backs onto Foots Cray Meadows or carries protected trees, a full householder planning application to Bexley is the safer route. We check the boundary and tree constraints before recommending either path.
Typical Sidcup housing stock
DA14 is dominated by 1930s bay-fronted semis and terraces along the Cray valley, wrapped around the older historic core of Foots Cray village where Victorian and Georgian buildings survive on the High Street. Larger detached and inter-war housing sits on the roads backing onto Foots Cray Meadows.
Streets we regularly draw for in Sidcup
High Street · Rectory Lane · Maidstone Road · Church Road
Wraparound Extension Drawings for Sidcup (DA14) homes: the package and the process
Every wraparound extension drawings we prepare for an Sidcup property is drawn to London Borough of Bexley’s validation standards and tuned to the DA14 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Sidcup DA14 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Bexley?+
Can I build a bigger extension because Bexley plots are larger?+
What extra control applies in Old Bexley Village or around Danson Park?+
How long does Bexley Council take to decide?+
How much do planning drawings cost in Bexley?+
Get your free Sidcup planning assessment
Tell us your Sidcup (DA14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.