MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportWraparound Extension Drawings in Earl's Court SW5

Stucco Victorian garden-square terraces converted to flats in Earl's Court SW5, within Kensington and Chelsea Council conservation areas
Earl's Court · SW5 · Kensington & Chelsea

Wraparound Extension Drawings in Earl's Court SW5

Fixed-fee, MCIAT-chartered wraparound extension drawings for Earl's Court (SW5) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

Free Earl's Court planning assessment

Tell us your Earl's Court (SW5) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Earl's Court (SW5) is a district of grand stucco garden-square terraces — Earl's Court Square, Nevern Square and Philbeach Gardens — most of them converted into mansion and conversion flats. Projects here are typically flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement works rather than whole-house extensions.

As the terraces fall within RBKC conservation areas and are largely in multiple occupation, we prepare drawings that respect the uniform stucco frontages and coordinate the leasehold and party-wall realities of flats, meeting the Royal Borough of Kensington and Chelsea's standard on external detail and subterranean control.

Stucco Victorian garden-square terraces converted to flats in Earl's Court SW5, within Kensington and Chelsea Council conservation areas
Isometric illustration of a Earl's Court SW5 home wraparound extension drawings design
Proposed floor plan
Earl's Court SW5

Planning in Earl's Court (SW5): what to know before you apply

There is no published householder Article 4 direction, but conservation-area status across SW5 withdraws most permitted-development rights and shapes what flat and rear alterations are acceptable. RBKC's subterranean development policy applies to lightwells and lower-ground excavation.

Typical Earl's Court housing stock

SW5 is characterised by tall stucco-fronted Victorian terraces set around Earl's Court Square, Nevern Square and Philbeach Gardens, the majority long since divided into mansion and conversion flats. Because whole houses are rare, work here is dominated by flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement schemes.

Streets we regularly draw for in Earl's Court

Philbeach Gardens · Eardley Crescent · Nevern Square · Bina Gardens

Wraparound Extension Drawings for Earl's Court (SW5) homes: the package and the process

Every wraparound extension drawings we prepare for an Earl's Court property is drawn to Royal Borough of Kensington and Chelsea’s validation standards and tuned to the SW5 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.

DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.

What makes a wraparound extension different from a rear or side return alone?

A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.

Do wraparound extensions need full planning permission in London?

Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.

Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.

Wraparound extension planning routes
RouteWhat it coversTypical fee
Full planning permissionRequired for almost all wraparound extensions given the combined footprintFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined pack including structural calculations for the L-shaped frame and drainage diversionPlanning + Building Regs pack ~£2,200–£3,850
Rear extension alone (comparison)Smaller single-storey addition, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Side return alone (comparison)Widens the kitchen only, keeps garden depth unchangedsee Side Return Extension Drawings, from £1,400
FAQ

Wraparound Extension Drawings in Earl's Court SW5 — FAQs

How much does a wraparound extension cost to design in London?+
Wraparound extension drawings start from £2,200, covering full planning permission and structural design for the combined frame. Adding building regulations and construction detail brings the package to the Planning + Building Regs band, up to around £3,850, fixed and agreed upfront.
Does a wraparound extension always need planning permission?+
In almost every case, yes. The combined depth and width of a rear and side return together generally exceed permitted development limits, so we design wraparound projects on the assumption a full householder planning application is needed.
Do I need an architect for a wraparound extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and structural coordination as an architect, for a fixed fee typically around 30% lower, with one team responsible for both the rear and side return elements rather than two separately briefed designers.
Will I need a Party Wall Agreement for a wraparound extension?+
Usually, because the side return element of a wraparound typically builds against or close to the boundary with the neighbouring property. We prepare the drawings your Party Wall surveyor needs alongside the planning application, timed so the notice period runs in parallel with the council's determination rather than adding to your overall timescale.
How long does it take to get wraparound extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for works in Kensington & Chelsea?+
Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.
Can I build a basement in Kensington & Chelsea?+
Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.
My home is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.
How long does the Royal Borough take to decide?+
The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Kensington & Chelsea?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Earl's Court planning assessment

Tell us your Earl's Court (SW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.