Wraparound Extension Drawings in Coombe KT2
Fixed-fee, MCIAT-chartered wraparound extension drawings for Coombe (KT2) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
KT2 north of Kingston takes in Coombe, an exclusive district of large detached houses set in landscaped grounds around the Coombe Hill and Coombe Wood golf courses, where owners typically plan a substantial extension, remodelling or an occasional new-build replacement.
Several Coombe conservation areas overlap this outcode, so even though Kingston operates no Article 4 directions a boundary check remains essential, because the low-density, tree-rich character means conservation-area consent and tree constraints often shape what can be built.
Planning in Coombe (KT2): what to know before you apply
Kingston has no Article 4 directions, so outside the conservation areas many householder projects fall under permitted development. Within the Coombe conservation areas, conservation-area consent applies to demolition and larger schemes are best taken through a full householder application, with tree preservation orders checked early.
Typical Coombe housing stock
The Coombe conservation areas hold large Victorian, Edwardian and 20th-century detached houses in spacious landscaped grounds, several by notable architects, set among golf courses and mature woodland north of Kingston town centre.
Streets we regularly draw for in Coombe
Coombe Hill Road · Coombe Lane West · Warren Road · George Road
Wraparound Extension Drawings for Coombe (KT2) homes: the package and the process
Every wraparound extension drawings we prepare for an Coombe property is drawn to Royal Borough of Kingston upon Thames’s validation standards and tuned to the KT2 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Coombe KT2 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Coombe planning assessment
Tell us your Coombe (KT2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.