Wraparound Extension Drawings in Becontree RM9
Fixed-fee, MCIAT-chartered wraparound extension drawings for Becontree (RM9) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Becontree (RM9) is defined by one thing above all: the Becontree Estate, built by the London County Council between 1921 and 1935 and still one of the largest public housing estates ever created, with roughly 26,000 homes laid out on garden-suburb principles. Almost every householder project here is an extension or loft on one of those cohesive interwar two-storey cottages, so the drawings have to sit comfortably within a very consistent, planned streetscape.
There is no conservation area covering Becontree — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the sheer uniformity of the estate layout and by the London Borough of Barking and Dagenham's design expectations, which lean on keeping the original cottage rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.
Because so many Becontree houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Gale Street, Lodge Avenue and Fitzstephen Road. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Becontree (RM9): what to know before you apply
Because the estate is so uniform, Barking and Dagenham assess extensions on Becontree cottages against the consistent interwar street pattern, so matching original brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the modest original plots and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Becontree housing stock
Two-storey interwar cottages — short terraced and semi-detached runs of brick and rendered houses set behind small front gardens on wide, uniformly planned streets. Built by the London County Council between 1921 and 1935, many are now privately owned following Right to Buy, which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Streets we regularly draw for in Becontree
Lodge Avenue · Gale Street · Marlborough Road · Fitzstephen Road · Ilchester Road · Rutland Gardens · Babington Road · Dronfield Gardens · Hewett Road · Cornworthy Road · Harrold Road · Easebourne Road
Wraparound Extension Drawings for Becontree (RM9) homes: the package and the process
Every wraparound extension drawings we prepare for an Becontree property is drawn to London Borough of Barking and Dagenham’s validation standards and tuned to the RM9 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Becontree RM9 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission to extend a house on the Becontree Estate?+
Is Becontree in a conservation area?+
How much do planning and building-regulation drawings cost for a Becontree extension?+
Get your free Becontree planning assessment
Tell us your Becontree (RM9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.